| Main > Everything Else |
| Golden Tee 2001 -2006 CHD's and the U53's, Big Buck Hunter, Carnival King |
| << < (14/17) > >> |
| ed12:
hi a few up-dates as it seems i am taking the lead on this ? some of the file's i run WILL PASS microsoft "sniffer" test..... best to run >>>>>"maleware byte's" scan/clean/etc<<<<< now the real new's atmel 2313 "flash-olny" spit it's .hex out tonight >copy-write-its-gamming-ltd< 1999-2010 << note that "they never renewed it" next is the epp ed |
| Loopey1:
You have more Knowledge than I do when it comes to this, I admit. So Yes I will say your in the lead. :) I apologize for not posting sooner, work has me "involved" the last couple days. I will take a look at your programs tonight when I get back. Thank You, BTW for keeping at this. |
| Loopey1:
I am also waiting for parts to come in. I am building that HV programmer in the Schematics But I did not have the shift registers needed for it. |
| ed12:
hi i took the day off..trust me i needed it.... let me know whem u are ready i am just touching up the coustom file now... here is the mickey lib0usb is olny a .dll there is no excuteable buy order of microsoft reason is easy it dose not lend its-self well for transfer from machine to machine on machine (a) it is perfect on machine (b) the port's just went side way's reason is libousb,so microsoft did not want it compiled as such.. but u can stuff it into a dos .bat file and or .cfg :):):):) catch the :):):) as long as it ran :off-board: and not as a :INSTALLER: that is the word right from microsoft,and it was all i needed i will place in a small readme >easy 1< so u can do your own edit's to the file ed |
| Loopey1:
Thank you Much. :) I should be getting the Chips in a day or 2. then I need to Build the Programmer. I think I will just breadboard this one. It is a lot easier than making a hard circuit. |
| Navigation |
| Message Index |
| Next page |
| Previous page |