| Main > Everything Else |
| Golden Tee 2001 -2006 CHD's and the U53's, Big Buck Hunter, Carnival King |
| << < (5/17) > >> |
| ed12:
my bawd yes reset is tied to 12v through a transistor so it can be switched also if u have avr studio 3/4/5 u can run this next code through and change the fuse setting's I will un-load setting's in a min or 3 ed |
| Loopey1:
I do not have AVR Studio, sorry. Do you have a Schematic for the 12V line and transistor I need to add? If things get to much more complex, with this circuit, I may just go buy a HV programmer...... I don't want to fry my Atmels. |
| ed12:
ya I will get it up-loaded for ya I am re-building some un-lock code tonight so my advice is take thew night off, btw u are close ed |
| Loopey1:
I was thinking a circuit like this. Highlighted in RED Take the wire off LPT 6 and AVR pin 1 and "splice" this into it. that way when LPT 6 toggles, it applies 12V to pin 1 of AVR?? |
| ed12:
exactly u are only using the 12 to un-lock then u either revert back to normal and or use your regular programmer for me I do it through a stk500 u do not erase chip if and when I do a run I use either my emp30 and or qcg-4 ed |
| Navigation |
| Message Index |
| Next page |
| Previous page |