You guys ready for gun games?
I put Hogan's Alley and Duck Hunt as Games 7 & 8 on my image (I own a set of HA roms and my PPU is from the set, so I have a soft spot for it). I read about the NES Zapper hack here, so I got one from eBay. I have an empty NES case so I took one of the controller connectors out so I didn't have to hack the game cord.
I then studied schematics to see what would work best for me. I'm using one of Mike's Arcade Unisystem to JAMMA adapters, so I decided to solder wires from the connector directly to the adapter. I also had to jumper from pin 4 to pin 1 to shut off the "missing gun" alarm.
After doing the gun transitor hack, I connected the gun to the connector.
After tweaking the monitor for brightness, well...
Success! I was able to play both Duck Hunt and Hogan's Alley!
So here's what I'm going to do.. I'm going to mount that connector underneath the control panel so I can plug in the gun when I want to play gun games. I also need to install a switch to enable/disable the alarm jumper, since in other games it's the up switch, and so if it's always connected it'll cause an issue. I'm making a master remote switch panel for the DIPS on my MultiVS, so all in all, it's pretty much done and perfect for my needs. What an awesome kit!
Sent from my SM-G386T using Tapatalk