Software Support > GroovyMAME

New CRT Emudriver/VMMaker/Arcade OSD download, documentation and discussion site

<< < (26/80) > >>

Calamity:

--- Quote from: Sledge on February 20, 2017, 03:43:59 am ---So what's 'vertical fixed' for then?

--- End quote ---

Well, that one assumes you're also going to play horizontal games on a vertical monitor, and so it processes the horizontal resolutions into vertical ones with the correct aspect ratio (the icons in VMMaker attempt to illustrate this). No one that I know actually runs horizontal games in that way (i.e. if you have a vertically mounted monitor it's because your arcade is dedicated to vertical games).

cools:
Can't log in to Eiusemmodi at the moment but have some feedback on CRT_Emudriver 2.0 b9 (Cat 12.6). I had a hugely frustrating part where one monitor was extended and the other not, and I see now why this is the case from the instructions http://geedorah.com/eiusdemmodi/forum/viewtopic.php?pid=1016#p1016

I plugged my starter monitor in on the VGA port of my card, not on the DVI. Do that and you end up in an awkward position immediately after the driver is installed, especially if you enable super resolutions from the start.

I was able to get around it with some judacious use of Safe Mode but it was a big pain. Might be worth adding a note in somewhere early/close to the download link saying the installation process is entirely different from CRT_Emudriver 1 and you MUST read the instructions thoroughly/follow them exactly.

Other than that all has worked perfectly, configuration extremely easy. Extremely impressed.

Calamity:
Hi cools,

Thanks for your comments and sorry for the time lost, I guess I'll need to clarify things in the download thread.

For W7+ anyway I like to recommend an HD5000+ card because things get significantly easier thanks to EDID emulation.

cools:
To eBay with me! Quest for 5450!

(My own fault for not reading instructions of course, but with v1 never giving me a jot of trouble that I didn't explicitly ask for I didn't give looking at instructions a second thought :) )

Doozer:

--- Quote from: cools on March 01, 2017, 08:49:00 am ---To eBay with me! Quest for 5450!

(My own fault for not reading instructions of course, but with v1 never giving me a jot of trouble that I didn't explicitly ask for I didn't give looking at instructions a second thought :) )

--- End quote ---

Hi Cools,

I have several 5450 and I am happy with them, nevertheless the number does not mean a lot with respect to the GPU generation and feature. (see on wikipedia https://fr.wikipedia.org/wiki/Radeon#Radeon_HD5000_.282009-2010.29). I have also 6450, 7450 and 8990 cards that borrow the same design and GPU.

It was mentioned that the picture is looking blurry with models starting from 5xxx. Do people know exactly which GPU are affected?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version