Software Support > GroovyMAME
New CRT Emudriver/VMMaker/Arcade OSD download, documentation and discussion site
Calamity:
--- Quote from: krick on February 11, 2017, 07:23:57 pm ---Are you referring to just cleanstretch and multithreading options, or do you mean "resolution 2560x0" as well?
--- End quote ---
I meant -cleanstretch and -multithreading. But -resolution 2560x0 is also redundant if you have a table just made of super resolutions. I now prefer to just create super resolutions for progressive modes, then leave a couple of normal 4:3 interlaced modes for vertical games when required, as older cards struggle with scaling to 2560x"high vertical resolution". In that case, you must not force 2560x0 in mame.ini, so the normal interlaced modes have a chance to be used.
Calamity:
--- Quote from: Sledge on February 11, 2017, 09:16:34 pm ---does Atom-15 work with new cards?
--- End quote ---
It should work. The most probable issue you may run into is not having enough space in the original bios.
Sledge:
What settings do i use for a vertical screen?
I have everything set up in windows etc, and use iRotate to rotate the screen
But things go bad when i set 'vertical' screen in VMM
Also, in VMM when using the arcade15 preset i get this normal display:
http://puu.sh/u8pm3/ec00428250.jpg
But when i use the MS929 (25kHz removed) preset i get this squashed display:
http://puu.sh/u8pj7/b36a716905.jpg
Is arcade15 good enough?
Should i worry about trying to use MS929?
Calamity:
--- Quote from: Sledge on February 18, 2017, 02:11:22 am ---Is arcade15 good enough?
Should i worry about trying to use MS929?
--- End quote ---
You can probably stick to arcade_15 if you're anyway removing upper ranges. You should be getting a normal desktop with ms929 anyway. All what matters is the resolution that ends up being applied to the desktop.
Sledge:
--- Quote from: Calamity on February 18, 2017, 07:32:18 am ---
--- Quote from: Sledge on February 18, 2017, 02:11:22 am ---Is arcade15 good enough?
Should i worry about trying to use MS929?
--- End quote ---
You can probably stick to arcade_15 if you're anyway removing upper ranges. You should be getting a normal desktop with ms929 anyway. All what matters is the resolution that ends up being applied to the desktop.
--- End quote ---
Which i can't actually see what it is as it's too squished, so ok, i'll stick to arcade15
But what settings do i use for a vertical screen?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version