Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: FREE: WG Monitor/Power Supply (US / Mechanicsville, Maryland)  (Read 1215 times)

0 Members and 1 Guest are viewing this topic.

boywondered

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:August 09, 2014, 09:58:12 am
  • I want to build my own arcade controls!
I am giving away the following items I pulled from a cabinet I am working on.  All the times worked when I pulled them, I am just "updating" the cabinet to fit my needs.  The cabinet was originally a Professor Pacman that was turned into a Hit the Ice hockey game.  The monitor has some burn-in from the Professor Pacman, but I did not notice it when playing Hit the Ice.  Color seemed good, with no distortion, waviness, etc.  I didn't take any face-on photos before I took the PCB out, but I do have one from the side as well as a picture of when I was trying to get soft15kz to work (the top waviness was an issue I was having with the computer/software).

I am sell this as a bulk lot, as I don't have the time to mess with individual parts.  I am asking $50, with the expectation that it will have to be picked up.  I am located near Mechanicsville, MD, and am willing to drive up to Waldorf to meet and deliver. 

I have included pictures below.

Wells Gardner 19inch (19K4906).  Comes with Chassis to mount it in the cabinet, as well as the plastic bezel.
Power Supply with power cord/wire harness



















*edited: 11 March - reduced price to FREE!
« Last Edit: May 11, 2014, 09:24:45 pm by boywondered »

boywondered

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:August 09, 2014, 09:58:12 am
  • I want to build my own arcade controls!
I am at the point where this stuff needs to go. 

I am willing to let it go to a good (or even not so good) home for free. 

Let me know if you are interested.  I would rather not take it to the electronic recycling.

happyfunball

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 162
  • Last login:December 11, 2015, 07:49:39 pm
Re: FREE: WG Monitor/Power Supply (US / Mechanicsville, Maryland)
« Reply #2 on: May 12, 2014, 05:43:43 pm »
you'll pobably have better luck posting this on KLOV

boywondered

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:August 09, 2014, 09:58:12 am
  • I want to build my own arcade controls!
Re: FREE: WG Monitor/Power Supply (US / Mechanicsville, Maryland)
« Reply #3 on: May 12, 2014, 06:22:13 pm »
Probably, but since I either need to be vouched for or pay to play I figured I would try here first.