Main > Consoles

Genesis/Mega Drive to monitor?

<< < (3/3)

rowie4life:
I not got one yet (arcade machine) so i'm not 100% sure what i

Dave_K.:

--- Quote from: rowie4life on December 09, 2003, 11:09:47 pm ---So I guessed that I needed one (Fingerboard) now I think I don't so what do I need for my Mega Drive 2 (Genesis 2) to a arcade monitor?

--- End quote ---

Yeah, you don't need to worry about the jamma fingerboard.  If you are hooking up your genisis to a normal arcade monitor (standard res), then just hookup the red/green/blue/ground and sync lines to the monitor inputs.  The sync line will go to the horizontal input.  You may need to put 220uf capacitors in line with the red/green/blue lines to the monitor to brighten up the picture (try first without it and see).

rowie4life:
id just though id say thanx

if i cant find a arcade machine would this monitor work alright seens how its 15 khz and not 15.7 khz (or whaever the pal version is)

Dave_K.:
Yes that monitor will work.  I have a hanatrex 25" polo in my arcade cabinet.  Most people round off the sync rate and just say 15khz, but its the same thing.

Navigation

[0] Message Index

[*] Previous page