Main > Consoles

Genesis/Mega Drive to monitor?

(1/3) > >>

rowie4life:
how to connect a Genesis/Mega Drive to a monitor.

thanx

Rowie

Spaced Invader:

--- Quote from: rowie4life on December 02, 2003, 05:40:08 am ---how to connect a Genesis/Mega Drive to a monitor.

thanx

Rowie

--- End quote ---

A Composite Monitor? RGB? Arcade? VGA?

Vague title/vague question.  ;)

rowie4life:
all of them

Dave_K.:
All the info you need is on gamesx.com...specifically check this link out:

http://www.gamesx.com/avpinouts/genesisav.htm

You will be able to hook up to a either a composite monitor (tv), or an an RGB/SCART  monitor (or arcade standard resolution monitor).  To hookup to a computer monitor you will need to use an upscanner (preferably  upscanning the RGB signal rather than the composite signal).

Happy hacking.

rowie4life:
Thanks for the site Dave_K.
 
have i done it right
and what goes to the Luma (Y) and Chroma (C)

1.  Blue ...................... 3  Blue
2.  5 VDC ................... 5.  +5v
3.  Green ................... 2.  Green
4.  Comp Video .......... ?.  ???
5.  Sync ...................... 4.  Video/Sync
6.  Audio Mono ........... ?.  ???
7.  Red ....................... 1.  Red
8.  Stereo L ................ 7.  Left Audio
9.  Stereo R ................ 6.  Right Audio
 
 
 

Navigation

[0] Message Index

[#] Next page