Main > Driving & Racing Cabinets

What do you think of that potentiometers (have to replace the ones in my Hang-On

<< < (4/4)

synonym9:

--- Quote from: Le Chuck on January 31, 2014, 10:22:38 am ---Even the cheap ones are still rated at like a quarter million revolutions so...

Go to digikey: http://www.digikey.com/product-search/en?pv1=611&pv24=2&pv545=176&FV=fff40004%2Cfff80335&k=potentiometer&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25

Use the drop downs to select the exact style of pot you need (shaft type, size, terminals, resistance track material etc) and get a ton of cheap durable options and a few expensive ones so you can feel like you're doing something worth while.

--- End quote ---

Seems to be one great pot-source....but I fear I am not able to answer all the questions of all that menues......  :dunno

Le Chuck:
You don't need to, you can just answer the ones that apply to slim down the list.  If you have the old pot you can measure the post (actuator length), put what type of post it is, and take a pretty good guess at the body type and that will get you 95% of the way.  Plus by holding shift you can select multiple.  eg there are 198 round pots at 5k ohm.  You narrow that by shaft or just reduce the size to match and you'll have a pretty tight list of perfect options. 

synonym9:


I am just about to try it.....btw, if somebody can read someting out that picture please tell me what you read:

jennifer:
http://potentiometer.com/index.cfm

Navigation

[0] Message Index

[*] Previous page