Main > Driving & Racing Cabinets
What do you think of that potentiometers (have to replace the ones in my Hang-On
synonym9:
I found out that SEGA used Allan Bradly Potentiometers (feel free to correct me if I am wrong on that).....but since they are quite cheap (one seller wanted 17USD for the pot and 66!!!!!!!! for the shipping) I looked for alternatives.
Since I mame my Hang-On I talked to Andy of Ultimarc because of there UHid and he told me that I can use whatever pot I want.
Accelerator and brake are new original stock parts...so they are genuine 5K-Ohm pots and I am not sure if I can mix pots with different values, thats why I look for pots with the same value for the steering, what do you think about that one:
http://www.ebay.com/itm/350682046554?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_sacat%3D0%26_from%3DR40%26_nkw%3D350682046554%26_rdc%3D1
Le Chuck:
I picked up the pots for a HangOn rebuild at radio shack. 4 buck a pop or something. If the post is too long just use some snips and cut it short. They are wired as pots and not as resistors so you can use whatever, just use a linear taper and not an analog taper.
http://www.radioshack.com/product/index.jsp?productId=2102789
Boom. $3.49 at the shack. 5k ohm even. And how!
jennifer:
The single price isn't so bad , but there is a lot of them... I spent like 125.00 on the set to rebuild my cp.
synonym9:
Those is even better:
http://www.ebay.com/itm/120956637423?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_sacat%3D0%26_from%3DR40%26_nkw%3D120956637423%26_rdc%3D1
http://www.ebay.com/itm/111161237210?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_sacat%3D0%26_from%3DR40%26_nkw%3D111161237210%26_rdc%3D1
This one would need to be modified:
http://www.ebay.com/itm/130811502675?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_sacat%3D0%26_from%3DR40%26_nkw%3D130811502675%26_rdc%3D1
http://www.ebay.com/itm/330957186160?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_sacat%3D0%26_from%3DR40%26_nkw%3D330957186160%26_rdc%3D1
synonym9:
--- Quote from: Le Chuck on January 30, 2014, 03:57:43 pm ---I picked up the pots for a HangOn rebuild at radio shack. 4 buck a pop or something. If the post is too long just use some snips and cut it short. They are wired as pots and not as resistors so you can use whatever, just use a linear taper and not an analog taper.
http://www.radioshack.com/product/index.jsp?productId=2102789
Boom. $3.49 at the shack. 5k ohm even. And how!
--- End quote ---
Does not look bad....how does it work for your Hang-On?
Navigation
[0] Message Index
[#] Next page
Go to full version