Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Help with Eightball Pin  (Read 958 times)

0 Members and 1 Guest are viewing this topic.

spag256

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 25
  • Last login:January 13, 2017, 07:12:17 pm
  • I want to build my own arcade controls!
Help with Eightball Pin
« on: August 01, 2013, 05:33:00 pm »
When I perform a solenoid test on my eightball pin the Outhole kicker,Side return kicker,Left,Right and bottom thumper bumpers,left and right slingshot and the coin lockout door solenoids don't respond. Only the Knocker,Chimes and flippers respond. I purchased a new solenoid driver module and the same solenoids don't respond. What can I do?

smartbomb2084

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 643
  • Last login:May 17, 2018, 02:57:42 pm
  • Having a SMART phone will make you DUMB.
Re: Help with Eightball Pin
« Reply #1 on: August 01, 2013, 10:43:07 pm »
Check the under-playfield mounted fuse located to the right of the right flipper assembly...

If it is good... Check for +43VDC at all of the playfield coils....
« Last Edit: August 01, 2013, 10:57:03 pm by smartbomb2084 »

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38215
  • Last login:February 09, 2019, 10:49:23 pm
Re: Help with Eightball Pin
« Reply #2 on: August 02, 2013, 09:11:50 am »

Might want to look at the wiring diagram, too.  If those are all after a certain point in the wiring then you have a break in the circuit on the ground line.  If this is the case look at the ground line between the last working coil and the first dead one.

Dawgz Rule

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 716
  • Last login:Today at 06:23:13 am
  • The more people I meet, the more I like my dogs
Re: Help with Eightball Pin
« Reply #3 on: August 02, 2013, 09:32:12 am »
Just in case you don't have the schematics:

http://www.ipdb.org/search.pl