CNC Cut Bartop Kits - Orders Open! New Models Available!

[HaRuMaN]

Ok, so I think I got everything, now... Recessed cuts for speaker / marquee, control panel parts, monitor support pieces, and a shelve type thing the cp and monitor assembly rest on...

[TKW4rr10r]

Ok, so I think I got everything, now... Recessed cuts for speaker / marquee, control panel parts, monitor support pieces, and a shelve type thing the cp and monitor assembly rest on...

It's a thing of beauty, as line art CNC paths go, lol

[HaRuMaN]

If you think it looks good, I'll go ahead and put it in for an estimate.

[TKW4rr10r]

Yeah man looks good to me

[HaRuMaN]

Yeah man looks good to me

Awesome

[ghostrider]

Is there any way you could build a kit for the Little Ms. Pac-man (http://forum.arcadecontrols.com/index.php/topic,128666.0.html) that Griffindodd (aka Maximus) designed and make it fit the asus 23" evo monitor?  I would be down for one of those for sure.

Any chance of this happening???

[HaRuMaN]

I have to get caught up on some other projects, but after that I can take a look.

[steved61]

Pedestal?

Steved61

[Rick]

Pedestal?

Of course! Where else would we put Haruman?

[HaRuMaN]

Lol. Yes, pedestal is up on the list. :-)

[tron84]

Pedestal?

Of course! Where else would we put Haruman?

I about spit out my Java when I saw this

of course he belongs on there  
+1 for the Pedestal thou Haruman & the mini pin cab wink wink  
That cocktail table is coming along Nicely!!!!!! so pretty

[mann0mann]

Hey Lee, any word on if an xbox original console will fit in the widescreen version?  Hope it will fit without having to remove to the case.  I'm thinking it might if mounted against the back of the monitor support?

[HaRuMaN]

Hey Lee, any word on if an xbox original console will fit in the widescreen version?  Hope it will fit without having to remove to the case.  I'm thinking it might if mounted against the back of the monitor support?

I just checked, and no, it will not fit. Sorry...

[tron84]

Well finally the Barstick is finished.
I used GGG, GP Wiz40 Max interface.  So down the line rotary joys could be used if decided to be put in here.  
Thanks again Haruman for the kit.

I do not have the back on it for the pic, so there is some light from the marquee showing on the wall.

But on the CP & the top of the Barstick, I did a Data East in a Star Wars font 

 

[Malenko]

that is tits right there, big fat oprah tits 

[tron84]

that is tits right there, big fat oprah tits 

lol 

Thanks man 

[degenatrons]

Well finally the Barstick is finished.

Looks sweet!  and good to see the first completed barstick    Hopefully will inspire others to make one.

[Rick]

Looks sweet!  and good to see the first completed barstick    Hopefully will inspire others to make one.

She's a beauty!

Just a question - have you considered rounding the two back corners? In looking at them, the top rear corner looks a bit sharp for my tastes, which led me to think if you did both, the t-molding could be 'joined' in the center of the bottom, and then you wouldn't have as many sharp corners.

Just my two cents.

[tron84]

Well finally the Barstick is finished.

Looks sweet!  and good to see the first completed barstick    Hopefully will inspire others to make one.

Thanks degenatrons & thanks for the open source plans for it.   I hope it will inspire others to make one.   I really like the Barstick. 
You can never have to many controllers 

@Rick
Thanks also 
The rear top corner is a bit sharp.  I had to snip a little of the inside track of the Tmold to get it to go on the rear corners.  No biggie thou 

[rablack97]

Nice work man on the barstick....

Did you recess the sticks a bit? Cause they look mights short.

I sometimes have to route a recess under the CP so the sticks sit up higher.

Regardless the assembly and completion was well done.

[tron84]

Nice work man on the barstick....

Did you recess the sticks a bit? Cause they look mights short.

I sometimes have to route a recess under the CP so the sticks sit up higher.

Regardless the assembly and completion was well done.

Thanks man 
& a shout out again to Haruman for his kits
No, I did not recess the sticks.  They are just shorties     normally I just say that after getting out of a cold pool 
I like the quick throws of them.  To the top of the ball is 2" from panel.

[Rick]

No, I did not recess the sticks.  They are just shorties     normally I just say that after getting out of a cold pool  I like the quick throws of them.  To the top of the ball is 2" from panel.

So, these are mounted from underneath then?

[HaRuMaN]

No, I did not recess the sticks.  They are just shorties     normally I just say that after getting out of a cold pool  I like the quick throws of them.  To the top of the ball is 2" from panel.

So, these are mounted from underneath then?

Yes.

[HaRuMaN]

So, until I find a good (read cheap) freight option, the Atari Cabaret will be local pickup only... 

[tron84]

So, until I find a good (read cheap) freight option, the Atari Cabaret will be local pickup only...

They must have some serious weight to them.  How much was the quote that you said, "umm I dont think so"?
I am sure somebody here knows a good freight option.

[HaRuMaN]

So, until I find a good (read cheap) freight option, the Atari Cabaret will be local pickup only...

They must have some serious weight to them.  How much was the quote that you said, "umm I dont think so"?
I am sure somebody here knows a good freight option.

Well the issue is that anything over 150 pounds gets pushed into freight category (with FedEx) and that basically quadruples the price.

3/4" Black Melamine is pretty heavy, even heavier than 3/4 plywood.  With 2 sheets of melamine, it'd be pretty close to the limit...  plywood should be able to keep under the limit maybe. 

[Rick]

Well the issue is that anything over 150 pounds gets pushed into freight category (with FedEx) and that basically quadruples the price.3/4" Black Melamine is pretty heavy, even heavier than 3/4 plywood.  With 2 sheets of melamine, it'd be pretty close to the limit...  plywood should be able to keep under the limit maybe.

I was thinking about this myself, for my pinball cabinets. If the price is prohibitive, try packaging the larger items separately, to bring the price down. Sure, you'll be almost doubling your regular shipping costs, and increasing the risk of lost/short shipments, but you should be able to get your packages in under the weight limit.

Source: I worked for Canada's largest courier company for over 13 years.

[HaRuMaN]

Well the issue is that anything over 150 pounds gets pushed into freight category (with FedEx) and that basically quadruples the price.3/4" Black Melamine is pretty heavy, even heavier than 3/4 plywood.  With 2 sheets of melamine, it'd be pretty close to the limit...  plywood should be able to keep under the limit maybe.

I was thinking about this myself, for my pinball cabinets. If the price is prohibitive, try packaging the larger items separately, to bring the price down. Sure, you'll be almost doubling your regular shipping costs, and increasing the risk of lost/short shipments, but you should be able to get your packages in under the weight limit.

Source: I worked for Canada's largest courier company for over 13 years.

Hmm...  that's a thought.  Put the 2 sides together in a largish box, then the rest of the parts in smaller box #2.  Each one would be well under 150 pounds. 

[Rick]

Hmm...  that's a thought.  Put the 2 sides together in a largish box, then the rest of the parts in smaller box #2.  Each one would be well under 150 pounds.

"Thank you for shopping at Rick's Shipping Tips. Helping out the competition since 2013."

[HaRuMaN]

Hmm...  that's a thought.  Put the 2 sides together in a largish box, then the rest of the parts in smaller box #2.  Each one would be well under 150 pounds.

"Thank you for shopping at Rick's Shipping Tips. Helping out the competition since 2013."

Lol.

[HaRuMaN]

Mmm...

[TKW4rr10r]

That's incredible!  The glass come with the kit? did you paint the black areas around the controls, or where they cut from black stock? Also what size LCD is in that cocktail?

I'm working with a local CNC guy in SC for the Atari kit. I hope to have one cut and some photos up in the next week or so, in case anyone is curious on how the finished product turns out.

[HaRuMaN]

Glass not included, but is available online for around $80 shipped.

Those particular control panels were cut from wood, and covered with black cabinet grade vinyl.  Metal pacman control panels (11") will work as well.

The top is designed to fit a 20.1" LCD, a Dell 2001FP.

[yotsuya]

HOLY ---smurfing--- ---steaming pile of meadow muffin---, THAT LOOKS AWESOME!

[Nephasth]

OMGWTFBBQ!!!

[HaRuMaN]

Another pic

[Rick]

Glass not included, but is available online for around $80 shipped.

Is that price coming from you, or a different source? Any opportunity for smoked/tinted?

[HaRuMaN]

Glass not included, but is available online for around $80 shipped.

Is that price coming from you, or a different source? Any opportunity for smoked/tinted?

Nope, different source.  I will look into smoked / tinted.

[HaRuMaN]

Flash on

[Rick]

With all the money you make from these kits, please consider investing in a better camera.





Awesome work, man!