Main > Retail vendors
FS: mini SLG 2X (scanline generator) (Colorado, USA)
holaplaneta:
--- Quote from: gnomenthusiast on August 27, 2015, 06:50:53 am ---
New to this sort of thing. I've purchased an SLG, but I want to use it with a 1600x1200 monitor (Syncmaster 214T). Will it operate at that resolution...
--- End quote ---
Same here, I have a Dell 2001FP and I was wondering if I could use this too. Thanks!
PL1:
--- Quote from: holaplaneta on November 20, 2015, 03:38:19 am ---
--- Quote from: gnomenthusiast on August 27, 2015, 06:50:53 am ---New to this sort of thing. I've purchased an SLG, but I want to use it with a 1600x1200 monitor (Syncmaster 214T). Will it operate at that resolution...
--- End quote ---
Same here, I have a Dell 2001FP and I was wondering if I could use this too. Thanks!
--- End quote ---
IIRC, resolutions higher than 640x480 or 1024x768 will not have scanlines because they don't have the sync signal that the SLG uses to blank alternating lines.
Higher resolution signals (front end, Windows desktop, modern games, etc) pass un-altered thru the SLG, while signals at 640x480 or 1024x768 get scanlines. (set your arcade games to one of these resolutions)
Scott
Confirmed:
--- Quote from: CraftyMech on January 16, 2013, 07:17:11 pm ---Hey Joe, you are correct that if MAME sets the VGA resolution to 640x480 (or 1024x768), then the mini SLG will add scanlines to the image. If you have a MAME front-end and don't want scanlines for those screens, just run the front-end at a higher resolution than 1024x768.
--- End quote ---
CraftyMech:
If you have been thinking about buying a mini SLG, head on over to Paradise Arcade: http://www.paradisearcadeshop.com/scan-line-generators/1253-mini-slg.html
I recently sent them a shipment of 32 units, the last batch I will be producing for now. I might resume production sometime in the future, but I am discontinuing the product until further notice.
3 years & 1,000 units sold is not a bad run!
SusanInParadise:
Special deal....
Mini SLG for sale
$15 dollars per Mini SLG, free shipping on all domestic orders with MINI SLGs
langlem:
I am having a strange situation with my MiniSLG. Latest version. I have recently changed using this from an older computer XP 32 bit and version of MAME to a Win7 64 bit .174 MAME.
I have tried both 768x1028@60hz and 480x640hz and get the exact same results.
I THINK I have all my settings in Mame, Mala and desktop resolution set correctly. I get scanlines but its very jerky and all the fonts and other things a "off." I am sure that I have something simple overlooked...or there is something in the MAME ini file that I have tweakes wrong. Here are a few pics showing the issue. Fonts are off, ladders are very of in DK...
Any ideas/advice is appreciated! Thanks.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version