So as mentioned on the other thread after picking a nippy little cheap PC it time I built
my Dino loving son Jack his own arcade.
His birthday party is Sunday so i left it a bit late as i started to build it
Wednesday lucky i had prototype Bartop shape to hand to help me a little
Ok so I shortened below the CP to look flush
I gave the sides a sand
And painted the panels
After that I put it back together
And sanded the Control Panel down
And that's enough for today....
my first time using black board paint I may have put it on a bit to thick
I'll do a light sand once it dry .... If ever
Fitted the vinyl to the Control panel and did a test fit and fitted the marquee
Drilled out the 28mm for the buttons
Did a test a fit for monitor bezel
And from the front (the plastic protect will hide the shame
Also fitted the speakers a quick test got of the screen protector
And stripped the PC and removed the bits I don't need and tapped into the on/off button
Little sneak view with t-molding
The buttons I bought can be swapped
One complete control panel
being tested
Bezzel sprayed and the machine is done
Not my greatest work but I'm happy with it,its not shelled completly but Hyperspin is in the start up folder and windows branding has been removed