Main > Monitor/Video Forum

Toshiba crt tv question

(1/2) > >>

kenshen:
hey i have a toshiba crt tv that i want to us in my arcade machine don't know what model but it has a dvd player built into the bottom of the i have a few questions first i would like to have it act like an arcade monitor in the sense that the moment it receives power it comes on is there a way to rewire it to do so? secondly i wish to hide this screen behind tainted glass and would like to turn the colors up on the screen but the tv has no menu button and no remote what can i do?

tony.silveira:
first up, try this.  unplug the tv from power.  then hold the power button in and plug it in.  does it come on?  if so, while still holding the power button, unplug the tv, wait a few seconds and plug it back in while STILL holding the power button.  If it comes on, then it is a simple solder point to get it to work the way you want.

as for the remote, go buy a cheap universal programable remote

kenshen:
so i tried the button is kinda messed up but it showed signs that it worked what kind of solder and iron should i get as i've never soldered before but would like to learn...

tony.silveira:

--- Quote from: kenshen on August 17, 2012, 07:44:06 pm ---so i tried the button is kinda messed up but it showed signs that it worked what kind of solder and iron should i get as i've never soldered before but would like to learn...

--- End quote ---

well before you go opening up a tv, you should do some reading on these boards, it can be very dangerous.

but basically, you want to find the small board that the power button pushes.  then it's a simple solder joint connecting the two points of the power button.

but AGAIN, DO NOT open the tv and start fiddling around until you've read up on it.

kenshen:
Got it wheres a good place to start?

Navigation

[0] Message Index

[#] Next page