Main > Project Announcements
Bartop - "NEONCADE"
firedance:
Wow, as it really been this long..........................
Real life and just being plain busy set my build back, well a while ::)
changes have been made to the PC hardware and controls ;D
will post again when i have pictures to share..........................................famous last words lol
firedance:
Hi All,
My 'new' pc, well a used n dusty HP DC5800 core 2 duo (3.0ghz) SFF, 2gb ram, 500GB HD, DVD writer and Multi card reader all for £31 delivered ;D, at least with this setup "dead or alive" and similar 3D games on mame play spot on now :)
The GFX card is a ATI HD6450 1GB that i had in my parts box.
and to prove i'm really going for it this time, cut the MDF as well 8), will get some plans up when i can work them out from my scuffy doodles lol
Looking around for a joypad encoder i got a bargain again from ebay, 2 joysticks, 16 buttons, 4 smaller buttons, all in white plus 2 "zero delay" encoders and wiring for £21.04 coming from china , should hopefully be here shortly :), did have the parts i posted previously but couldn't resist it for the price.
firedance:
Oh the 8' x 4' mdf sheet was a slight 'second', scruffy looking and a damaged corner for £3 from my local diy shop, just enough for 1 bartop and spares if needed or 2 bartops if I'm careful ;D
firedance:
Trying to keep costs down so a bit of a impulse buy - http://www.amazon.co.uk/gp/product/B0065RZG88/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
will have to router out a recess as the 12mm MDF is the full length of the threads,oops.
firedance:
Finally my package from China is here in the UK and out for delivery, will post pictures when it comes :)