Main > Project Announcements
Donkey Kong Themed Bartop
eaconner:
That was fast! Yesterday, (3:30-10:30) I completed all of the pieces, everything has been cut with the CNC router, the edges have been slot cut for t-molding, and everything has been lightly sanded by hand. I have attached a few photos of the machine and the results.
Tonight, I will be priming and sanding the pieces. I hope to start putting everything together over the weekend.
1. CNC Router
2. Cutting out the front piece with pocket and holes for the speaker.
3. Front of the control panel.
4. Back of the control panel with pocket for the joystick.
5. Front of the front piece with holes for the speaker.
6. Back of the front piece with pocket and holes for the speaker.
leapinlew:
Loving the grill. nice work.
eaconner:
Last night I primed, sanded, and primed all of the parts again. I am getting ready to go pickup some paint and sand all of the parts again. Then give everything a nice coat of DK blue.
eaconner:
Should I paint the inside edge black or blue?
rablack97:
i dunno, both look good, depends on the color of your t-molding i guess...
Me personally would do black to create the darkness effect around my monitor.