Author Topic: Act-Labs USB Light Gun HELP!!! (Read 1964 times)

djsting · « **on:** September 15, 2003, 01:16:52 pm »

I have my computer working with the monitor plugged directly into the video card. I follow the instructions for the light gun installation then move the monitor plug to the light gun and plug the light gun into the video card...now all I get is a white screen. I plug the monitor back into the video card and it works fine. I have checked the device manager in Win2000 and the human interface device that was installed for the light gun is there and has no errors listed.

Can someone please help me out with this problem??? There is nothing on Act-Labs website about this kind of trouble.

Lilwolf · « **Reply #1 on:** September 15, 2003, 03:00:35 pm »

sounds like you have the sync switch turned on...

flip it and see if that goes away...

djsting · « **Reply #2 on:** September 15, 2003, 10:56:55 pm »

That was it!! Thank you so much!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Act-Labs USB Light Gun HELP!!! (Read 1964 times)

djsting

Act-Labs USB Light Gun HELP!!!

Lilwolf

Re:Act-Labs USB Light Gun HELP!!!

djsting

Re:Act-Labs USB Light Gun HELP!!!