The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: mrclean on December 06, 2009, 09:58:03 pm

Title: degaussing help
Post by: mrclean on December 06, 2009, 09:58:03 pm

I moved around one of my 19'' CRT's mounted it / flipped it upside down, and noticed some really whacky rainbow colors on both the left and right sides, I tried the drill trick with a magnet but maybe I'm doing it wrong. What's the best method to fixing the rainbow / degaussing . I can move the colors around but it seems to come back. I spun the drill with a magnet attached aprx 2'' away from the screen and then moved my drill back slowly. I've heard of degaussing wands but I would like to fix the issue without purchasing any other additional tools. Any help is appreciated. I can provide pictures or video if needed.

Title: Re: degaussing help
Post by: grantspain on December 07, 2009, 11:28:22 am

the auto degauss should sort that out from cold-what model is this monitor?

Title: Re: degaussing help
Post by: mrclean on December 07, 2009, 10:02:27 pm

Not sure about the model, I should have time to pull it out tomorrow, but I just refired it after 24hrs and still the same problem .

Title: Re: degaussing help
Post by: qrz on December 12, 2009, 10:12:35 pm

the "big guns"

http://www.mcmelectronics.com/product/DISTRIBUTED-BY-MCM-D-48-/72-790 (http://www.mcmelectronics.com/product/DISTRIBUTED-BY-MCM-D-48-/72-790)

"pistols"

http://www.mcmelectronics.com/product/DISTRIBUTED-BY-MCM-72-785-/72-785 (http://www.mcmelectronics.com/product/DISTRIBUTED-BY-MCM-72-785-/72-785)


or wind ur own  ;)


qrz