The NEW Build Your Own Arcade Controls

Arcade Collecting => Restorations & repair => Topic started by: meauxmeaux on July 07, 2009, 08:26:56 pm

Title: Atari Football 2 player
Post by: meauxmeaux on July 07, 2009, 08:26:56 pm

Still working on it, but here's my progress so far.

www.AtariFootball.com

Title: Re: Atari Football 2 player
Post by: RetroACTIVE on July 07, 2009, 09:29:37 pm

Nice site!  Great repair work you have going on... I'm in the middle of a simlar situation with my 4P.

Title: Re: Atari Football 2 player
Post by: meauxmeaux on July 07, 2009, 09:40:56 pm

Thank you.  I'm enjoying the restoration, but it's taking a LOOOOOOONG time to complete.

I'm pretty much at the last stages with the "wood-grain vinyl" and the football player artwork.

How are you doing on your 4-player?

Title: Re: Atari Football 2 player
Post by: RetroACTIVE on July 07, 2009, 09:49:55 pm

Quote from: meauxmeaux on July 07, 2009, 09:40:56 pm

Thank you.  I'm enjoying the restoration, but it's taking a LOOOOOOONG time to complete.

I'm pretty much at the last stages with the "wood-grain vinyl" and the football player artwork.

How are you doing on your 4-player?

I've all the pieces cut and re-vinyled except the door panel... I've also refabbed every single piece of blocking material for reassembly.  I still need to send the coin door and power block out for powder coating and need to touch up the edges of the panels with the artwork.

All totaled I will end up refabbing about 12 pieces only keeping the two main artwork and table support panels...like yours, it will be pretty much new!

Looking forward to the rest of your progress!