The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: zaktallica on July 01, 2009, 06:15:10 pm

Title: My s-video on the sansui wont work
Post by: zaktallica on July 01, 2009, 06:15:10 pm

Well as you can see from my other thread I messed up that philips tv..so I was going to use this 27 inch sansui I have with s video..I lug the thing downstairs and plug it in and the s video wont come on all it is, is red marks all over the screen. I attached a picture. I have a nvedia 6600gt and it worked fine on the other tv. Help? Thanks

Title: Re: My s-video on the sansui wont work
Post by: DJ_Izumi on July 01, 2009, 06:19:59 pm

Check to see if the S-Video output works on other TVs would be the first step.  Tell us your results from that.

Title: Re: My s-video on the sansui wont work
Post by: zaktallica on July 01, 2009, 06:24:24 pm

It does I used it on a 25 inch philips and anouther 20 inch tv I had..Video source from teh same computer..

Title: Re: My s-video on the sansui wont work
Post by: zaktallica on July 01, 2009, 07:58:28 pm

This is very frustrating has anyone had there screen look like this before?

Title: Re: My s-video on the sansui wont work
Post by: zaktallica on July 02, 2009, 01:41:07 pm

none?

Title: Re: My s-video on the sansui wont work
Post by: Ummon on July 03, 2009, 06:16:36 pm

Pretty trippy.

Title: Re: My s-video on the sansui wont work
Post by: DJ_Izumi on July 03, 2009, 06:18:25 pm

Something on the decoder is likely damaged.

I think you're SOL.

Title: Re: My s-video on the sansui wont work
Post by: zaktallica on July 03, 2009, 09:36:59 pm

Ok it works but only with the s-video to component adapter. The res its set at is 720x480 and it wont let me change it without messing up. Mame has black bars on horizontal games..Any suggestions?

Title: Re: My s-video on the sansui wont work
Post by: Ummon on July 05, 2009, 04:40:21 pm

You mean black spaces. Ze are spazes. Um, service menu? Orrrrr, driver software adjustment?