The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: 16BIT on June 29, 2009, 11:02:59 pm

Title: Konami life force pcb screen too much to the right
Post by: 16BIT on June 29, 2009, 11:02:59 pm

I just recieved my lifeforce pcb board off of ebay, everything is good except the screen could be centered back to the left about an inch.  I am running this on my dedicated double dragon 2 , 25" monitor cabinet and all of my other games are fine, is there a way I can center the pcb picture?

Title: Re: Konami life force pcb screen too much to the right
Post by: MonMotha on June 29, 2009, 11:09:26 pm

Have you adjusted the horizontal position control on the remote board or chassis board (location varies by monitor)?

Title: Re: Konami life force pcb screen too much to the right
Post by: 16BIT on June 30, 2009, 09:37:10 pm

I have not adjusted my monitor, but is there an adjustment on the pcb as well?  If not I will get back there and adjust it, its just that my other games seem alright or maybe they were just hardly noticable.  This game however is way over to the right.

Title: Re: Konami life force pcb screen too much to the right
Post by: MonMotha on June 30, 2009, 09:57:13 pm

It's normal for the monitor to have to be adjusted when swapping games.  All hardware outputs slightly different video signals.  I've never seen a game board with video geometry adjustments; you're expected to just adjust the monitor.