The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: pickle me stupid on February 23, 2009, 04:59:13 am

Title: i need to replace trimmer pot on neck board please help
Post by: pickle me stupid on February 23, 2009, 04:59:13 am

i have a wells gardner k7400 with to much blue
the trimmer does nothing and when i tested it the readings did not much up with other pots

1k 109m are the numbers on the trimmer
i do not know what the part is called when purchasing it
does anyone know the part number from mouser electronics or any other parts store

thank you

Title: Re: i need to replace trimmer pot on neck board please help
Post by: Ken Layton on February 23, 2009, 11:37:51 am

Bob Roberts has plenty of trimmer pots on his site.

Title: Re: i need to replace trimmer pot on neck board please help
Post by: pickle me stupid on February 24, 2009, 01:17:35 am

thanks for the help it gave me an idea of what i need
i was hoping to order it from mouser because i needed to order two thyristors from them, for a pinball machine
wanted to save  money on shipping

Title: Re: i need to replace trimmer pot on neck board please help
Post by: pickle me stupid on February 24, 2009, 01:38:46 am

i found it
i finally typed the right numbers into the WG web site, and found a parts list
 the neck board was a p719
thank you for your help
sorry i was not to be more clear on what the id numbers were and on what i needed