The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: dreamakuma on February 15, 2009, 11:54:24 am

Title: RGB to ntsc
Post by: dreamakuma on February 15, 2009, 11:54:24 am

I suck at doing monitors. I can't solder. on my X-men:COTA, I've done everything else.But the monitor is still too far out of my league. So is this any good?

 http://www.jammaboards.com/store/cv-04-rgb-to-ntsc-pal-tv-converter-pcb/prod_253.html

Are there any bad tv's that don't work well with it? Any games that don't work well with it? I'm only using it with a CPS2 board.

Title: Re: RGB to ntsc
Post by: grantspain on February 15, 2009, 12:03:36 pm

i used one of those on my time crisis 3 machine to replace an official namco one and it worked just as well
you just need to adjust the colour pots to the correct levels

Title: Re: RGB to ntsc
Post by: dreamakuma on February 15, 2009, 09:39:39 pm

Is the composite connection any good? Or should I go with S-video? are the color pots on the board?

Title: Re: RGB to ntsc
Post by: grantspain on February 16, 2009, 02:42:09 am

time crisis 3 uses the s-vid connection.there are three colour pots on the rbg converter board