The NEW Build Your Own Arcade Controls

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: quanlee on April 24, 2008, 11:47:20 am

Title: Stargate Marquee Light Problems
Post by: quanlee on April 24, 2008, 11:47:20 am

I just replaced the marquee bulb in my Stargate, and now notice that while playing light shines through both in front of the glass, and behind it on the monitor frame/bezel. Do I have some missing molding or something? I looked up between the glass and the underside of the marquee, and there's a space about 3/4 inch. I also noticed the glass is not tight to the monitor bezel, or the rear of the marquee.

Any ideas?

Title: Re: Stargate Marquee Light Problems
Post by: Ken Layton on April 24, 2008, 12:20:25 pm

I've noticed that too on alot of Williams cabinets. Don't think there's anything missing or wrong. Just a design oversight I think.

Title: Re: Stargate Marquee Light Problems
Post by: RetroACTIVE on April 24, 2008, 02:48:30 pm

If you have a 3/4" gap... then maybe you are missing the monitor bezel trim piece that holds the bezel and mounts to the speaker panel ?

and Ken is correct... Williams cabs are not really too tight.

post a pic when you get a chance.