The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: alienware32 on April 03, 2008, 06:38:42 pm
-
Just received my chassis from alva and I'm impressed very well packed. Everything seems to be in order. I'll post the results when I receive my order from ultimarc
-
Based in the picture... this is 203 chassis.
You must use an isolation transformer.
Also the chassis will not have a contrast control as there is no IC on the neck borad ( normally an LM1203)
Good luck
Rick@niemandisplays.com
-
had to send it back ordered the wrong one i got the 825hr and i need the 826hr i have a 27 inch tube :banghead: they have great customers support
-
quick update i will receive my chassis back tomarrow anyone one here know what resolution the 826 wei ya can handle don't want to damage anything I'm using soft15 and a 8500 card
-
Standard resolution only.
-
been running the chassis for two days now and I'm impressed it was easy to setup here some pictures it don't have any geometry issues
-
has any experience a speed up in games with a arcade monitor i had a jvc tv with componet but with the 27 arcade monitor i made the games seem faster
-
you'll soon get used to it ......as it is more of a perception issue .
though, the scanning beam has a bit more area to cover in the same time frame as that of a smaller tube.
qrz
-
does anyone know the max resolution of the wei ya 826hr on thing i can say it a 100 times better than a tv