The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: robotype on December 30, 2007, 12:30:11 pm

Title: sanyo 20-ez donkey junior monitor issue
Post by: robotype on December 30, 2007, 12:30:11 pm

the image is cut on the top, any clue?

http://img144.imageshack.us/img144/3459/cimg3784nx4.jpg

http://img255.imageshack.us/img255/4015/cimg3783np7.jpg

Title: Re: sanyo 20-ez donkey junior monitor issue
Post by: SirPeale on December 30, 2007, 01:04:44 pm

http://forum.arcadecontrols.com/index.php?topic=74932.0

Title: Re: sanyo 20-ez donkey junior monitor issue
Post by: Kevin Mullins on December 30, 2007, 01:22:18 pm

Looks kinda like a bit of foldover..... might try reducing the vertical size/height.

Title: Re: sanyo 20-ez donkey junior monitor issue
Post by: SirPeale on December 30, 2007, 03:05:24 pm

Quote from: Kevin Mullins on December 30, 2007, 01:22:18 pm

Looks kinda like a bit of foldover..... might try reducing the vertical size/height.

It's DEFINITELY foldover, but it's caused by old caps.  Once they're replaced, the screen will adjust to the edges again.

Title: Re: sanyo 20-ez donkey junior monitor issue
Post by: Kevin Mullins on December 30, 2007, 04:14:49 pm

Yeah, the rest just looks so good that it was hard to tell.   :cheers:

Title: Re: sanyo 20-ez donkey junior monitor issue
Post by: robotype on December 30, 2007, 11:01:19 pm

it would be great to know exactly which cap does this...anyway thank you!

Title: Re: sanyo 20-ez donkey junior monitor issue
Post by: Kevin Mullins on December 31, 2007, 12:01:00 am

Well, in my opinion.... you can figure out exactly which cap may be bad and causing a particular problem with the right equipment..... but when ALL of the caps are probably going on twenty plus years old... you might as well just do a cap kit otherwise another one will probably go bad down the road a bit and just cause a different problem.   ;)