The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: BALLS2THEWALL on October 21, 2007, 09:48:30 pm

Title: Monitor stop working for a minute
Post by: BALLS2THEWALL on October 21, 2007, 09:48:30 pm

It wasn't working but i could hear sound.  Then when I hit the side of the cab it came back on.  I saw a guy hit the coin acceptor earlier which most likely made some wire or something jiggle loose.  When looking on the inside i don't see anything unplugged or loose.  Any suggestions for next time this happens.  Obviously I'll try hitting the side of the cab again.:)

Title: Re: Monitor stop working for a minute
Post by: Ken Layton on October 22, 2007, 12:16:50 am

Did you read this first?

http://forum.arcadecontrols.com/index.php?topic=62016.0

Title: Re: Monitor stop working for a minute
Post by: Kevin Mullins on October 22, 2007, 09:22:56 am

Pull the chassis out and reflow all the solder joints.