The NEW Build Your Own Arcade Controls
Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: Mauzy on October 20, 2007, 10:33:38 pm
-
I recently bought a Super Pac Man cocktail table on ebay that was advertised as a cabinet with tube only, and thats what I got. Inside, I found a tag that says "SUPM-CT 317-0217" (cant remember how many zeros). It also has "217" on top of the rim around the cabinet base. Anyone know how many of these were made? Im having a hard time finding parts for it...
Heres a link to the auction: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250171209687
(BTW: The light colored wood look was just a laminate that peeled off to reveal the original walnut-type finish standard on the Midway Cocktail cabinets.)
-
I used to have a Super Pacman cocktail, and I can tell you the 2 near impossible things to find for it will be the top underlay and the 2 control panel overlays. You already have the top underlay, you'll probably never find the control panel overlays. Everything else should be readily available. You might have to use some parts designed for Pacman/Ms Pacman cocktails, but they all fit. Twobits has most everything. The boards you should be able to pick up via ebay, etc....I think they are the same as the upright boards, just with a dip switch changed or a trace grounded to put it in cocktail mode.
-
Well, Problem is, the guys who sold it to me had sold the guts to some one else, but had forgotten to mention in the auction that that underlay was sold as well, so im thinking Im going to put a set of Ms Pac boards in it. Aren't the original Ms Pac cocktail CPs 9 inches wide? This table has 11 inch control panels, which Im thinking Pac Man cocktails had. At any rate, it'll do for the time being.
-
I posted all the Super Pacman info I have here: http://PromoMotion.com/superpacman/
Includes schematics, manual, paint code, flyers, etc.
Hope it helps!
-
Awesome. Thanks!
-
also check out arcade depot
http://www.arcadedepot.com/HTML/control_panels.html