Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: gamecaptor on May 03, 2003, 04:45:43 am

Title: AAAHH, Help! (D9200 problem)
Post by: gamecaptor on May 03, 2003, 04:45:43 am

I recently bought a D9200 monitor (like 2 weeks ago) and all of the sudden the monitor stopped showing the red. So I adjusted the red contrast in the menu, but every time I changes screens (say start or exit a game) it defaults back to no red, so I have to manually adjust it back :( For your information, I

Title: Re:AAAHH, Help! (D9200 problem)
Post by: tom61 on May 03, 2003, 07:07:53 pm

Make sure the monitor cable is plugged in all the way. If it is plugged in all the way, you should try another cabel with it. It sounds like you monitor isn't getting the red signal properly, and that's likely the cable.

Title: Re:AAAHH, Help! (D9200 problem)
Post by: gamecaptor on May 03, 2003, 08:31:41 pm

I've checked that, it's not the cable. It's the actual "red" setting in the menu options, it's turned all the way off. If I turn it up, it just goes back to nothing (i.e. turned off) when I change games/resolution/settings.