The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: DaveJ-UK on September 12, 2007, 11:06:29 am

Title: WG 25K7193 - White bar at bottom of screen
Post by: DaveJ-UK on September 12, 2007, 11:06:29 am

WG 25K7193 monitor + JPAC + ArcadeVGA @ 320x288

On the Windows desktop I have a thin white bar at the bottom of the screen. When I move the mouse over it, the cursor gets slightly larger and turns upside-down as I move it further down.

I've seen this before and it was caused by the screen wrapping but I can't remember which controls I need to be adjusting?

Title: Re: WG 25K7193 - White bar at bottom of screen
Post by: Ken Layton on September 12, 2007, 11:31:20 am

Adjust the 50/60 hz control as described here:

www.jstookey.com/arcade/WG_25k7191/

Title: Re: WG 25K7193 - White bar at bottom of screen
Post by: DaveJ-UK on September 12, 2007, 01:03:42 pm

Thanks for such a speedy response, Ken,

I hadn't even seen that pot before but it worked a treat.

Title: Re: WG 25K7193 - White bar at bottom of screen
Post by: weasel-like_animal on September 18, 2007, 10:35:02 am

Ken, thanks so much for posting that link, it has some really good information on it!

Title: Re: WG 25K7193 - White bar at bottom of screen
Post by: Ken Layton on September 18, 2007, 12:26:22 pm

I'm the one who provided him with the schematic.