The NEW Build Your Own Arcade Controls

Main => Software Forum => Topic started by: ARTIFACT on August 22, 2007, 01:34:35 am

Title: Model2 =+ Daytona USA = "Network card not connected, cancelling"
Post by: ARTIFACT on August 22, 2007, 01:34:35 am

I'm sure this is a silly newbie thing again  .......... ;D

is there a config / switch I need to set on Model2 emu (Nebula team's) to launch and play Daytona?

Thanks!

Title: Re: Model2 =+ Daytona USA = "Network card not connected, cancelling"
Post by: SGT on August 22, 2007, 07:23:37 am

Press F2 and go to game system. Change link id to single.

Title: Re: Model2 =+ Daytona USA = "Network card not connected, cancelling"
Post by: ARTIFACT on August 22, 2007, 02:18:02 pm

thank you very much!

Title: Re: Model2 =+ Daytona USA = "Network card not connected, cancelling"
Post by: mxd on September 26, 2011, 11:18:06 pm

sorry to revive such an old thread.

Is there a way to have the rom configured so I only need to change from master to single once ?

Or is there another option so it still thinks it's a master but no other player playing ?

I just put the m2network.ini in the directory last night but it still is waiting for a connection.


thanks
Matt

Title: Re: Model2 =+ Daytona USA = "Network card not connected, cancelling"
Post by: mxd on September 27, 2011, 07:00:54 am

figured it out, when I press unload rom on v1.0 my emu crashes so the config is not updated. When I then do the setup within v0.9 and unload my config stays set.
thanks

Title: Re: Model2 =+ Daytona USA = "Network card not connected, cancelling"
Post by: Malenko on September 27, 2011, 08:00:10 am

I hit F2 and I cant even figure out how to set it to single.  Can you post your cfg?  Should I use .9 for Daytona instead of 1.0?

Title: Re: Model2 =+ Daytona USA = "Network card not connected, cancelling"
Post by: mxd on September 27, 2011, 05:08:01 pm

you hit f2, then you use your VR buttons (what ever you had them configured as) to traverse the menu, then you select (start key I think) game system then you can change to single etc..

The important thing to remember is to uload the ROM so the config is saved.