The NEW Build Your Own Arcade Controls

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: ryanborne on April 10, 2007, 03:22:37 pm

Title: Dual game Golden tee, Shuffleshot Trackball Harness.
Post by: ryanborne on April 10, 2007, 03:22:37 pm

Hello, Does anyone sell or know how to make a y-connector so I can play Golden Tee and Shuffleshot with only one trackball?  I have the cables that go to the trackball from the pcbs. and can switch between them, but it would be nice to always have them hooked up.

Title: Re: Dual game Golden tee, Shuffleshot Trackball Harness.
Post by: horseboy on April 10, 2007, 04:39:40 pm

multigame.com (http://multigame.com)

Title: Re: Dual game Golden tee, Shuffleshot Trackball Harness.
Post by: fredster on April 11, 2007, 04:09:59 pm

Are both PCB's powered up in one cab?  If not, then just find the manuals for the PCB's and the pinouts, and make the Y cable to both.

I do suggest this,
Hook the power(5V) for the trackball up to the main power supply, not the board.  Then put the X+X-/Y+Y- to the boards. 

You don't have to power the trackball from the PCB.  You can do that separately. 

Do you understand?