The NEW Build Your Own Arcade Controls

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: BobA on April 02, 2007, 09:35:39 am

Title: Pico ITX Board for Micro Mame
Post by: BobA on April 02, 2007, 09:35:39 am

Looks like the pico ITX board should be just the thing for a really tiny fully functional Micro Mame cabinet.  The board is the same size as a 2.5 inch drive.

Link to article (http://www.akihabaranews.com/en/news-13551-The+micro+VIA+EPIA+PX10000GX+mobo+finally+reaches+Akihabara%21.html)

Link2 (http://www.mini-itx.com/)

Title: Re: Pico ITX Board for Micro Mame
Post by: Buddabing on April 02, 2007, 10:33:25 am

I don't see where the power hooks up to on the board.

There's a small power supply, called the PicoPSU that might be useful for bartops as well.

Link to SPCR article (http://www.silentpcreview.com/article601-page1.html).

Title: Re: Pico ITX Board for Micro Mame
Post by: BobA on April 02, 2007, 11:10:43 am

It looks to be a special power connector.   There is a 12 pin connector just at the top of the heatsink that has the largest pins of all the connectors so I am guessing it is for power.