The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: Cfour on March 21, 2007, 09:44:42 pm

Title: WG 19K4952: Wiring to VGA cable
Post by: Cfour on March 21, 2007, 09:44:42 pm

Using this web site as a guide, http://dragonsden.emuunlim.com/pinout.jpg , I am wiring my VGA exender cable.  However, not only does my monitor NOT have a second molex connector (not really conerned about that - saw other similar posts on the forum), it appears to be missing the POS H Sync cable on the first molex connector. 

Here is a picture:
http://www.sternie.com/img122.jpg

It is a bit blurry, but you can see the missing cable.  Is this an issue?  I have not tried to do the wiring yet as I figured I should check here first.

The game did work and display fine (WWF Superstars) prior to gutting the cab.

Title: Re: WG 19K4952: Wiring to VGA cable
Post by: flashdog on March 25, 2007, 01:33:18 am

Looks like its their, just no wire on it? It's just a bit more than blurry. Got a better pic?

Title: Re: WG 19K4952: Wiring to VGA cable
Post by: Cfour on March 25, 2007, 04:52:49 pm

Right, the "hole" for it is there, but no wire.  I have not tried to wire this up yet, i might tonight yet.  Sorry, no better pic but what you said is dead on.

Title: Re: WG 19K4952: Wiring to VGA cable
Post by: northerngames on March 26, 2007, 10:01:22 am

yup just solder a wire in and that spot and yo should have the H and V signals again.