The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: FrizzleFried on January 19, 2007, 09:38:05 am

Title: Wei-Ya B+ Voltage Measurement
Post by: FrizzleFried on January 19, 2007, 09:38:05 am

I just received the following document from Wei-Ya regarding measurement of the B+ Voltage on their G07 replacement chassis.   I thought Ken,  for one,  may be interested in this document for future reference.

Title: Re: Wei-Ya B+ Voltage Measurement
Post by: FrizzleFried on January 19, 2007, 09:39:10 am

...and this is the second document they sent...

Title: Re: Wei-Ya B+ Voltage Measurement
Post by: Ken Layton on January 19, 2007, 11:31:44 am

That's good, except that I am not going to install "Traditional Chinese Font" on my computer just to read what it says. I have no room to put a 7 mb file on my hard drive.

Title: Re: Wei-Ya B+ Voltage Measurement
Post by: FrizzleFried on January 19, 2007, 12:33:54 pm

...just for you Ken!

JPGed versions...

Title: Re: Wei-Ya B+ Voltage Measurement
Post by: FrizzleFried on January 19, 2007, 12:34:34 pm

And the other...


EDIT: DAMN!  I just noticed...the part that WEI-YA added to indicate where to check for B+ didn't JPG...it's evidently a layer that doesn't appear in photoshop...time to try Acrobat.

Title: Re: Wei-Ya B+ Voltage Measurement
Post by: FrizzleFried on January 19, 2007, 12:50:44 pm

I dunno...I can't convert it.  I can load it in to photoshop but it doesn't include the layer that shows where to measure....and I can load it in to acrobat but I can't save it without the chinese character set in place.

Title: Re: Wei-Ya B+ Voltage Measurement
Post by: woodygjw on January 19, 2007, 10:50:06 pm

I added to the jpeg's to show the adjustment on them.  Ground meter to video ground, attach meter to R315.  Then adjust VR101 to 115 VDC.

woody

Title: Re: Wei-Ya B+ Voltage Measurement
Post by: Ken Layton on May 08, 2019, 12:04:24 am

Bumping this old topic for those who may be interested.