The NEW Build Your Own Arcade Controls

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: thetaylors3 on January 02, 2007, 08:30:03 pm

Title: skeeball schematic
Post by: thetaylors3 on January 02, 2007, 08:30:03 pm

I just purchased a skeeball (old red&white one, I think ModelH) to go with my two mame machines.  Everything works except the ball counter.  Two wires to the ball counter were broken, so I fixed those but the lower left section on the LED still lights up sometimes so the decode isn't right.  It's odd that these wires weren't all taken care of in the PCB.  Anyway, I figure it just isn't wired correctly.  Does anyone have a schematic scanned in.  I know I can probably come across one on ebay, but was hoping to get faster help.

Thanks...

Title: Re: skeeball schematic
Post by: Kevin Mullins on January 02, 2007, 09:59:28 pm

I didn't know if you had found this thread yet:
http://forum.arcadecontrols.com/index.php?PHPSESSID=8be43a4941c7030c68c491890111d9ce&topic=61683.0 (http://forum.arcadecontrols.com/index.php?PHPSESSID=8be43a4941c7030c68c491890111d9ce&topic=61683.0)

Model H Schematics:
http://unclet.arcadecontrols.com/SkeeBall/SkeeballDeltronicsPics1.html (http://unclet.arcadecontrols.com/SkeeBall/SkeeballDeltronicsPics1.html)

Title: Re: skeeball schematic
Post by: thetaylors3 on January 07, 2007, 08:43:12 pm

Thanks.  I had found this, but I actually have a Model S.  I don't know why I put model H above, just had model H on the brain.  Any help on a Model S out there???

Title: Re: skeeball schematic
Post by: Ken Layton on January 08, 2007, 01:16:09 am

Have you contacted the manufacturer www.skeeball.com to purchase your manuals & schematics?