The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: kspiff on March 09, 2003, 02:12:38 am
-
I read at the 8liners site yesterday (when looking at the TV -> RGB monitor chassis) that you can judge a CRT by its color and that gray is good and brown is bad.. the old Electrohome G07-CBO I'm about to try to fix has a reddish-brown color tube (at least under the anode cap -- currently the cleanest spot on the tube). Should I even bother trying to fix it, or does this mean the tube is definitely/100% busted?
Also another question.. I have a 25" TV I want to convert into an arcade monitor with the 8liners chassis.. currently, the TV works but the screen contracts to almost nothing when the tube gets warmed up. This -- I would assume -- has nothing to do with the CRT itself, does it? Don't want to convert and then have the same issue.
-
He means the front of the screen being brown...some older CRT have a brownish color to them. Careful with the Electrohome, I can't get the pincushioning out of mine and the 8liners guy wasn't too helpful, here's his reply:
Hi,
It seems that the chassis is not compatable with this tube....
Try it in another picture tube.
Did you read my tech info at:
http://www.Genao.com/datatech/monitor.html
Regards,
Victor Genao
http://www.8liners.com
Doug Hansen wrote:
> Hello Vic,
>
> I'm getting some pretty bad pincushioning that I can't adjust out on one of
> my monitors is there a way to remedy this? Also, I may have ordered the
> wrong chassis for one of the monitors. It has eight pins but the neckboard
> is too small and won't fit on the yolk.
>
> Here's a pic of the one I'm having trouble with.
>
> Doug
He seems to keep pointing you back to his web page that isn't very detailed so be careful on which one you order, the electrohome had 8 pins but it used a 10 pin neckboard. The 8-pin neckboards do not fit on the electrohome monitors. Luckily I had another Wells Gardner that this board did work on.
I'm not sure about your second question...sorry...
Doug
-
Oh, no.. the Electrohome tube is going to be reattached to to its original chassis after I attempt to repair (pretty much rebuild/replace) it.
I don't think the tube is bad on the 25" TV, though, giving it some thought.. it likely wouldn't display any picture at all.. and when the image isn't too large/small it looks pretty good.