The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: kurtw on June 16, 2006, 07:14:31 pm

Title: Mounting Diagram for Betson/Kortek 27", same as D9200?
Post by: kurtw on June 16, 2006, 07:14:31 pm

I just picked up a betson imperial at Betson West in Buena park. I'm kinda puzzled at why Betson/Koretek doesn't have a mounting diagram or specifications for their monitors online, or with the monitor. The monitor is sitting in my truck at the moment and I won't get a chance to take it out and measure it until later tonight.

I'm adapting my  Mercs dedicated cabinet to be a mame box, I took out a dead 25" monitor that was mounted vertically and rotated the plywood mounting chassis so I can install the betson.

Anyone have a pdf file with exact benson measurements out there?

I was at Betson today and they guys there suggested there was no mounting specifications. I assuming I can get away with using the D9200 measurements and making new mounting brackets based upon that.

Any thoughts?

Title: Re: Mounting Diagram for Betson/Kortek 27", same as D9200?
Post by: Ken Layton on June 17, 2006, 12:28:38 am

In general all "universal" mount monitors of the same tube size have similar mounting specs.

Title: Re: Mounting Diagram for Betson/Kortek 27", same as D9200?
Post by: kurtw on June 17, 2006, 03:30:27 am

I just mounted the monitor in the cabinet, I compared the measurements to the D9200, its mostly the same. Time to test the display tomorrow, I have to install the arcade vga card in the mame box tomorrow.