The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: deadhead on February 27, 2003, 10:10:26 pm

Title: monitor problems
Post by: deadhead on February 27, 2003, 10:10:26 pm

Hi all, I still have some issues with my cabinet that I can

Title: Re:monitor problems
Post by: tom61 on February 28, 2003, 05:03:58 pm

Did you set either mame or ArcadeOS to use an arcade monitor? If you did, change it back to normal PC monitor, as that will mess up the display.

When you exit ArcadeOS, how does DOS look?

Title: Re:monitor problems
Post by: deadhead on February 28, 2003, 07:39:18 pm

I used fraggle

Title: Re:monitor problems
Post by: Nailz on March 01, 2003, 12:59:29 am

I've been doing some reading because I want to do exactly what you are doing as well...

From what I can tell, Fraggles boot cd uses advance Mame, and on the Ultimarc site, they specifically mention that the ArcadeVGA card elimates the need for Advance Mame and that if used together, Advance Mame will overwrite the settings that the card automatically takes care of.  Try loading up DOS and using dmame with ArcadeOS instead.  I'd also suggest going through the forum on ultimarcs site and the ArcadeOS forum as well, they are both linked at the top of the page here.