The NEW Build Your Own Arcade Controls

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: lebanull on February 18, 2006, 12:09:56 pm

Title: Pac and Ms.Pac on the same Pac PCB
Post by: lebanull on February 18, 2006, 12:09:56 pm

Is this possible?...Having Ms.Pac and Pac on a Pac PCB or in a Pac cab? Here's my finished pac:

(http://img.photobucket.com/albums/v33/cuebin/P2160001.jpg)


thanks...

Title: Re: Pac and Ms.Pac on the same Pac PCB
Post by: woodygjw on February 18, 2006, 01:07:57 pm

Yep, it is possible.  Here is one page that may or may not be over your head:
http://marvin3m.com/video/pacman.htm

Or, do I google search for multipac 96 in 1.  This is a much easier route.  Me personally, I don't like the idea of modifying a board, I would much rather have something that can be removed and easily returned to its original state.  I'm sure there are other ways as well.

woody

Title: Re: Pac and Ms.Pac on the same Pac PCB
Post by: lebanull on February 20, 2006, 03:11:39 pm

Thanks for this info...very nice!

Quote from: woodygjw on February 18, 2006, 01:07:57 pm

Yep, it is possible.  Here is one page that may or may not be over your head:
http://marvin3m.com/video/pacman.htm

Or, do I google search for multipac 96 in 1.  This is a much easier route.  Me personally, I don't like the idea of modifying a board, I would much rather have something that can be removed and easily returned to its original state.  I'm sure there are other ways as well.

woody