The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: Coffein on February 12, 2003, 04:14:40 am

Title: Warning the voltage is to low !!!
Post by: Coffein on February 12, 2003, 04:14:40 am

Hi all

My SEGA virtua Fighter cab with the 29" Flat screen monitor
NANAO AMUSEMENTSCAN 29 Type MS9-29SU is startet to come with an error when i power up the cab  ???

There is a nice clear green screeen with this message.

"Warning the voltage is to low ! Please increase the voltage to 5 volt".

Nothing else happens ?

Any idea where i should start here ?

/Coffein

Title: Re:Warning the voltage is to low !!!
Post by: MKL on February 12, 2003, 12:58:17 pm

But what are you powering up exactly? You actually have the game Virtua Fighter (and hence Naomi, or was it Model 2/3?) inside? Check the +5v rail of the game and if it's too low raise the voltage by tweaking the voltage knob on the PSU.

Title: Re:Warning the voltage is to low !!!
Post by: Coffein on February 13, 2003, 11:30:06 am

It is Sega Virtual fighter II http://home1.stofanet.dk/coffein/virtuaII.jpg
I found the voltage nob and it now seems to work, i screw it 1/4 clockwise and put on a voltmeter, it is now outputting 5.4 volt.

/Coffein