The NEW Build Your Own Arcade Controls

Main => Software Forum => Topic started by: mccoy178 on January 09, 2006, 06:06:46 am

Title: All of my .ini's within mamewah 1.62b9 and a link to screenshots
Post by: mccoy178 on January 09, 2006, 06:06:46 am

Hope this helps some of the noobs.  If you get to this point, here is my actual mame.ini inside of the config folder within mamewah.  THIS IS NOT MY MAME.INI from mame.  Think about this for a sec.  It is located in this drive:

C:\mamewah1.62\config\mame\mame.ini

### mame.ini (mamewah v1.62) ###

emulator_title                            M.A.M.E.

### List Generation Settings ###
rom_path                                  auto:[emuexepath]\roms
rom_extension                             zip;txt
dat_file                                  auto:[emuexepath]\[emuexename].dat
nms_file                                  auto:[emuexepath]\[emuexename].nms
catver_ini_file                           c:\mame\catver.ini
list_generation_method                    auto:rom_folder_vs_listxml

### Execution Settings ###
pre_emulator_app_commandlines             C:\mame\Betabrite\lcdpath\mame.lcd
emulator_commandline                      c:\mame\mame.exe [name]
post_emulator_app_commandlines            C:\Mamewah1.62\exit.lcd
general_app_commandlines                 

### Artwork Locations ###
artwork_image_paths                       auto:[emuexepath]\snap;[emuexepath]\titles;[emuexepath]\marquee;[emuexepath]\control;[emuexepath]\cabinet;[emuexepath]\flyers;[emuexepath]\boxart;[emuexepath]\cart;[emuexepath]\art9;[emuexepath]\art10
movie_preview_path                        auto:[emuexepath]\previews
movie_artwork_no                          1

### Screen-Saver Settings ###
enable_music_in_screensaver               1
select_random_game                        1
saver_type                                movie
movie_path                                C:\Mamewah1.62\ssmovie
movie_fullscreen                          1
quit_delay                                30
saver_commandline                         C:\Mamewah 1.62\ssmovie\mspacman.scr

### Additional Settings ###
music_path                               
lcd_display_file_path                     C:\mame\Betabrite\lcdpath

### Settings used by MAMEWAH ###
current_list                              1

Here is my mamewah.cfg, located in:
C:\mamewah1.62\config\mamewah.cfg

# MAMEWAH 1.62b9+ Standard Control Configuration

# PLEASE USE INPUT CODES FROM \MAMEWAH\DOCS\CTRLR.TXT
# NOTE DIFFERENCES TO MAME's (EX!) CTRLR INI FILES:
# 'NOT' (!) LOGIC NOT SUPPORTED
# 'AND' LOGIC EXPRESSED USING '&' (NOT SPACE)
# 'OR' PIPE '

Title: Re: My mame.ini WITHIN mamewah 1.62b9
Post by: mccoy178 on January 09, 2006, 06:14:29 am

I may post all my .ini's.  I'm feeling froggy.  Dax kinda peeved me off.

Title: Re: My mame.ini WITHIN mamewah 1.62b9
Post by: Minwah on January 09, 2006, 08:44:27 am

The last two files are labelled incorrectly ;)  The second file listed is the ctrlr file so should be mamewah.cfg (cfg extension lifted from MAME's ctrlr files).  The final file should be mamewah.ini.

Title: Re: My mame.ini WITHIN mamewah 1.62b9
Post by: pointdablame on January 09, 2006, 12:24:44 pm

countdown until someone says something like " I don't see a mamewah.ini in my MAME folder"

5...


4.....


3...........

Title: zinc.ini
Post by: mccoy178 on January 15, 2006, 11:53:38 pm

Here is my zinc.ini:

### zinc.ini (mamewah v1.62) ###

emulator_title                            Zinc

### List Generation Settings ###
rom_path                                  C:\Zinc1.1\roms
rom_extension                             zip
dat_file                                  c:\zinc1.1\zinc.dat
nms_file                                  auto:[emuexepath]\[emuexename].nms
catver_ini_file                           c:\zinc1.1\catver.ini
list_generation_method                    dat_file

### Execution Settings ###
pre_emulator_app_commandlines             c:\joytokey\joytokey.exe zinc{nowait}{autoquit}
emulator_commandline                      C:\Zinc1.1\zinc.exe [name]
post_emulator_app_commandlines            C:\Mamewah1.62\exit.lcd
general_app_commandlines                 

### Artwork Locations ###
artwork_image_paths                       c:\zinc1.1\snap;[emuexepath]\titles;[emuexepath]\marquee;[emuexepath]\control;[emuexepath]\cabinet;[emuexepath]\flyers;[emuexepath]\boxart;[emuexepath]\cart;[emuexepath]\art9;[emuexepath]\art10
movie_preview_path                        C:\mame\movies
movie_artwork_no                          1

### Screen-Saver Settings ###
enable_music_in_screensaver               1
select_random_game                        1
saver_type                                movie
movie_path                                C:\Mamewah1.62\ssmovie
movie_fullscreen                          1
quit_delay                                30
saver_commandline                         C:\Mamewah 1.62\ssmovie\mspacman.scr

### Additional Settings ###
music_path                               
lcd_display_file_path                     C:\Zinc1.1\Zinclcd

### Settings used by MAMEWAH ###
current_list                              1

Title: atari2600.ini
Post by: mccoy178 on January 15, 2006, 11:56:15 pm

Here is my z26.ini:

### atari2600.ini (mamewah v1.62) ###

emulator_title                            Atari 2600

### List Generation Settings ###
rom_path                                  C:\z26\2600roms\Good2600 [1.00]
rom_extension                             bin
dat_file                                  auto:[emuexepath]\[emuexename].dat
nms_file                                  auto:[emuexepath]\[emuexename].nms
catver_ini_file                           auto:[emuexepath]\catver.ini
list_generation_method                    rom_folder

### Execution Settings ###
pre_emulator_app_commandlines             C:\z26\2600lcd\atari2600.lcd
emulator_commandline                      c:\z26\z26.exe "[rompath]\[name].[romext]"{nodosbox}{safelaunch}
post_emulator_app_commandlines            C:\Mamewah1.62\exit.lcd
general_app_commandlines                 

### Artwork Locations ###
artwork_image_paths                       C:\z26\All Atari all the time\AtariScreenshots\2600Screens
movie_preview_path                        auto:[emuexepath]\previews
movie_artwork_no                          1

### Screen-Saver Settings ###
enable_music_in_screensaver               1
select_random_game                        1
saver_type                                movie
movie_path                                C:\Mamewah1.62\ssmovie
movie_fullscreen                          1
quit_delay                                30
saver_commandline                         C:\Mamewah 1.62\ssmovie\mspacman.scr

### Additional Settings ###
music_path                                c:\mamewah\music
lcd_display_file_path                     C:\z26\2600lcd

### Settings used by MAMEWAH ###
current_list                              1

Title: Gameboy.ini
Post by: mccoy178 on January 15, 2006, 11:57:14 pm

Here is my Gameboy.ini:

### gameboy.ini (mamewah v1.62) ###

emulator_title                            Gameboy

### List Generation Settings ###
rom_path                                  c:\gameboy\roms
rom_extension                             zip
dat_file                                  auto:[emuexepath]\[emuexename].dat
nms_file                                  auto:[emuexepath]\[emuexename].nms
catver_ini_file                           auto:[emuexepath]\catver.ini
list_generation_method                    auto:rom_folder

### Execution Settings ###
pre_emulator_app_commandlines             c:\gameboy\GBAlcd\gameboy.lcd
emulator_commandline                      c:\gameboy\roms\visualboyadvance.exe "[rompath]\[name].[romext]"{dosbox}{safelaunch}
post_emulator_app_commandlines            C:\Mamewah1.62\exit.lcd
general_app_commandlines                 

### Artwork Locations ###
artwork_image_paths                       c:\gameboy\snaps;[emuexepath]\titles;[emuexepath]\marquee;[emuexepath]\control;[emuexepath]\cabinet;[emuexepath]\flyers;[emuexepath]\boxart;[emuexepath]\cart;[emuexepath]\art9;[emuexepath]\art10
movie_preview_path                        c:\NES\previews
movie_artwork_no                          1

### Screen-Saver Settings ###
enable_music_in_screensaver               1
select_random_game                        1
saver_type                                movie
movie_path                                C:\Mamewah1.62\ssmovie
movie_fullscreen                          1
quit_delay                                30
saver_commandline                         C:\Mamewah 1.62\ssmovie\mspacman.scr

### Additional Settings ###
music_path                               
lcd_display_file_path                     c:\gameboy\GBAlcd

### Settings used by MAMEWAH ###
current_list                              1

Title: Nintendo.ini
Post by: mccoy178 on January 15, 2006, 11:58:29 pm

Here is my NES.ini:

### nes.ini (mamewah v1.62) ###

emulator_title                            Nintendo

### List Generation Settings ###
rom_path                                  C:\NES\Roms\NESRen\USA
rom_extension                             zip
dat_file                                  auto:[emuexepath]\[emuexename].dat
nms_file                                  auto:[emuexepath]\[emuexename].nms
catver_ini_file                           auto:[emuexepath]\catver.ini
list_generation_method                    auto:rom_folder

### Execution Settings ###
pre_emulator_app_commandlines             C:\NES\NESlcd\nes.lcd
emulator_commandline                      C:\NES\FCEU98.13\fceu.exe "[rompath]\[name].[romext]"{nodosbox}{nosafelaunch}
post_emulator_app_commandlines            C:\Mamewah1.62\exit.lcd
general_app_commandlines                 

### Artwork Locations ###
artwork_image_paths                       C:\NES\NESsnaps\ScreenShots\USA\screens;C:\NES\NESsnaps\BoxScans\Boxscans_NES_Fronts_(USA)_28May04;C:\NES\NESsnaps\CartScans\Justlabels;[emuexepath]\control;[emuexepath]\cabinet;[emuexepath]\flyers;[emuexepath]\boxart;[emuexepath]\cart;[emuexepath]\art9;[emuexepath]\art10
movie_preview_path                        C:\NES\previews
movie_artwork_no                          1

### Screen-Saver Settings ###
enable_music_in_screensaver               1
select_random_game                        0
saver_type                                movie
movie_path                                C:\Mamewah1.62\ssmovie
movie_fullscreen                          1
quit_delay                                30
saver_commandline                         C:\Mamewah 1.62\ssmovie\mspacman.scr

### Additional Settings ###
music_path                               
lcd_display_file_path                     C:\NES\NESlcd

### Settings used by MAMEWAH ###
current_list                              1

Title: Nintendo64.ini
Post by: mccoy178 on January 15, 2006, 11:59:22 pm

Here is my Nintendo64.ini:

### nintendo64.ini (mamewah v1.62) ###

emulator_title                            Nintendo 64

### List Generation Settings ###
rom_path                                  c:\Project64\games
rom_extension                             zip
dat_file                                  auto:[emuexepath]\[emuexename].dat
nms_file                                  auto:[emuexepath]\[emuexename].nms
catver_ini_file                           auto:[emuexepath]\catver.ini
list_generation_method                    auto:rom_folder

### Execution Settings ###
pre_emulator_app_commandlines             c:\Project64\N64lcd\n64.lcd
emulator_commandline                      c:\Project64\project64wrapper.exe "[rompath]\[name].[romext]"{nodosbox}{safelaunch}
post_emulator_app_commandlines            C:\Mamewah1.62\exit.lcd
general_app_commandlines                 

### Artwork Locations ###
artwork_image_paths                       c:\Project64\Screenshots;c:\Project64\BoxScans\Boxscans_N64_(USA)_28May04;[emuexepath]\marquee;[emuexepath]\control;[emuexepath]\cabinet;[emuexepath]\flyers;[emuexepath]\boxart;[emuexepath]\cart;[emuexepath]\art9;[emuexepath]\art10
movie_preview_path                        c:\Project64\previews
movie_artwork_no                          1

### Screen-Saver Settings ###
enable_music_in_screensaver               1
select_random_game                        0
saver_type                                movie
movie_path                                C:\Mamewah1.62\ssmovie
movie_fullscreen                          1
quit_delay                                30
saver_commandline                         C:\Mamewah 1.62\ssmovie\mspacman.scr

### Additional Settings ###
music_path                               
lcd_display_file_path                     c:\Project64\N64lcd

### Settings used by MAMEWAH ###
current_list                              1

Title: Playstation.ini
Post by: mccoy178 on January 16, 2006, 12:00:12 am

Here is my Playstation.ini:

### playstation.ini (mamewah v1.62) ###

emulator_title                            Playstation

### List Generation Settings ###
rom_path                                  j:\epsxe\roms
rom_extension                             bin
dat_file                                 
nms_file                                 
catver_ini_file                           
list_generation_method                    rom_folder

### Execution Settings ###
pre_emulator_app_commandlines             j:\epsxe\playstationlcds\playstation.lcd
emulator_commandline                      j:\epsxe\epsxe160\ePSXe.exe -nogui -loadbin "[rompath]\[name].[romext]"{dosbox}{safelaunch}
post_emulator_app_commandlines            C:\Mamewah1.62\exit.lcd
general_app_commandlines                 

### Artwork Locations ###
artwork_image_paths                       j:\epsxe\snap;[emuexepath]\titles;[emuexepath]\marquee;[emuexepath]\control;[emuexepath]\cabinet;[emuexepath]\flyers;[emuexepath]\boxart;[emuexepath]\cart;[emuexepath]\art9;[emuexepath]\art10
movie_preview_path                        auto:[emuexepath]\previews
movie_artwork_no                          1

### Screen-Saver Settings ###
enable_music_in_screensaver               1
select_random_game                        0
saver_type                                movie
movie_path                                C:\Mamewah1.62\ssmovie
movie_fullscreen                          1
quit_delay                                30
saver_commandline                         C:\Mamewah 1.62\ssmovie\mspacman.scr

### Additional Settings ###
music_path                               
lcd_display_file_path                     j:\epsxe\playstationlcds

### Settings used by MAMEWAH ###
current_list                              1

Title: Turbo Graphx16.ini
Post by: mccoy178 on January 16, 2006, 12:01:09 am

Here is my TG16.ini:

### tg16.ini (mamewah v1.62) ###

emulator_title                            Turbo Grafx 16

### List Generation Settings ###
rom_path                                  j:\tg16\roms
rom_extension                             pce
dat_file                                  auto:[emuexepath]\[emuexename].dat
nms_file                                  auto:[emuexepath]\[emuexename].nms
catver_ini_file                           auto:[emuexepath]\catver.ini
list_generation_method                    auto:rom_folder

### Execution Settings ###
pre_emulator_app_commandlines             j:\tg16\tg16lcd\tg16.lcd
emulator_commandline                      j:\tg16\pce.exe "[rompath]\[name].[romext]"{nodosbox}{safelaunch}
post_emulator_app_commandlines            C:\Mamewah1.62\exit.lcd
general_app_commandlines                 

### Artwork Locations ###
artwork_image_paths                       j:\tg16\Snap\screens;j:\tg16\Box;j:\tg16\Cart;[emuexepath]\control;[emuexepath]\cabinet;[emuexepath]\flyers;[emuexepath]\boxart;[emuexepath]\cart;[emuexepath]\art9;[emuexepath]\art10
movie_preview_path                        auto:[emuexepath]\previews
movie_artwork_no                          1

### Screen-Saver Settings ###
enable_music_in_screensaver               1
select_random_game                        0
saver_type                                movie
movie_path                                C:\Mamewah1.62\ssmovie
movie_fullscreen                          1
quit_delay                                30
saver_commandline                         C:\Mamewah 1.62\ssmovie\mspacman.scr

### Additional Settings ###
music_path                               
lcd_display_file_path                     j:\tg16\tg16lcd

### Settings used by MAMEWAH ###
current_list                              1

Title: Vpinball and Pinmame.ini
Post by: mccoy178 on January 16, 2006, 12:02:03 am

Here is my vpinball.ini:

### vpinball.ini (mamewah v1.62) ###

emulator_title                            vpinball

### List Generation Settings ###
rom_path                                  c:\pinball\Tables
rom_extension                             vpt
dat_file                                 
nms_file                                 
catver_ini_file                           
list_generation_method                    rom_folder

### Execution Settings ###
pre_emulator_app_commandlines             c:\joytokey\joytokey.exe pinball{nowait}{autoquit};c:\pinball\Pinballlcd\vpinball.lcd
emulator_commandline                      c:\pinball\tables\vp-launch4.exe [name]{nodosbox}{nosafelaunch}{cursor}
post_emulator_app_commandlines            c:\Mamewah1.62\exit.lcd
general_app_commandlines                 

### Artwork Locations ###
artwork_image_paths                       c:\pinball\pinmame\snap;[emuexepath]\titles;[emuexepath]\marquee;[emuexepath]\control;[emuexepath]\cabinet;[emuexepath]\flyers;[emuexepath]\boxart;[emuexepath]\cart;[emuexepath]\art9;[emuexepath]\art10
movie_preview_path                       
movie_artwork_no                          1

### Screen-Saver Settings ###
enable_music_in_screensaver               1
select_random_game                        0
saver_type                                movie
movie_path                                C:\Mamewah1.62\ssmovie
movie_fullscreen                          1
quit_delay                                30
saver_commandline                         C:\Mamewah 1.62\ssmovie\mspacman.scr

### Additional Settings ###
music_path                               
lcd_display_file_path                     c:\pinball\Pinballlcd

### Settings used by MAMEWAH ###
current_list                              2

Title: Re: My mame.ini WITHIN mamewah 1.62b9 and a link to screenshots
Post by: mccoy178 on January 16, 2006, 12:40:40 am

You can see screenshots of my folders at:

www.ohiostate.photosite.com

I am missing a couple key .ini's that can be found at JCrouses' site:

Daphne
PC Games

Jukebox programs are pretty much the same as PC Games!!!  You just create a .lnk and place it in a new folder.

JCrouse's website:   http://home.comcast.net/~cpviewer/ (http://home.comcast.net/~cpviewer/)

NOTE: I would post some of his .ini's, but they are his.  He has done more than enough to make a great site for resources.  You can also find links to most of the emulators there also.  Just some food for thought!

Title: Re: All of my .ini's within mamewah 1.62b9 and a link to screenshots
Post by: Spartan on January 16, 2006, 02:12:44 pm

Hey thanks for posting all of this info.  I am one of those idiots who could never seem to figure out MameWah, so this will definately help!

(Heckuva bball game yesterday!  :o )

Title: Re: All of my .ini's within mamewah 1.62b9 and a link to screenshots
Post by: mccoy178 on January 16, 2006, 03:06:39 pm

No Problem! 

Quote

(Heckuva bball game yesterday!   )

Boo! ;D

Title: Re: All of my .ini's within mamewah 1.62b9 and a link to screenshots
Post by: somunny on January 17, 2006, 07:39:44 pm

Thanks for posting the z26 ini.  I'm having some issues with it and this should help with the troubleshooting.

Steve

Title: Re: All of my .ini's within mamewah 1.62b9 and a link to screenshots
Post by: mccoy178 on January 17, 2006, 08:55:22 pm

no problem.  any questions, just ask.

Title: Re: All of my .ini's within mamewah 1.62b9 and a link to screenshots
Post by: roberts123 on January 17, 2010, 10:44:24 pm

Thanks,
      This has been fantastic it has helped out a lot.