The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: sdrob04 on November 09, 2005, 04:55:50 pm

Title: 19V2000 help needed
Post by: sdrob04 on November 09, 2005, 04:55:50 pm

I purchased this monitor with a burned up HV transformer.  At a minimum I know I need to replace the HV rectifier diode, but I have no reference for how this region of the board should appear when the diode is present, in place, and not burned up (see my ugly photos).  I'm particularly interested in the nylon holders and any special connectors, cups, etc. that might be needed in-between the transformer itself and the tube anode. 

Is anyone willing to remove the cover to their HV cage and shoot a few pictures for me?  Any HV repair stories you can share?  That would really help the repair process...thank you  :)

Title: Re: 19V2000 help needed
Post by: ArcadeMaze on November 10, 2005, 12:27:21 am

Here are pics of mine, I hope it helps.

Title: Re: 19V2000 help needed
Post by: ArcadeMaze on November 10, 2005, 12:27:56 am

And These:

Title: Re: 19V2000 help needed
Post by: sdrob04 on November 10, 2005, 04:32:39 pm

Thanks so much for your help with my HV issue.

Title: Re: 19V2000 help needed
Post by: ArcadeMaze on November 10, 2005, 08:04:53 pm

Sorry about that.  I am not much of a photographer.  I just took these, hopefully they are better.  From what I can tell, one of my nylon holders is broke off from the board and just hanging on the anode wire.

Title: Re: 19V2000 help needed
Post by: cw on November 11, 2005, 07:36:52 am

wow that hv diode blew the heck up.....


I know Bob R has the hv diode as I just got 2 in from him. 

Title: Re: 19V2000 help needed
Post by: sdrob04 on November 11, 2005, 11:53:56 am

Can you share your repair experiences with this component when you tackle it?