The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: PileDriver on July 22, 2005, 08:23:38 pm

Title: 19" mon from ebay - A little help? Solved.
Post by: PileDriver on July 22, 2005, 08:23:38 pm

I just bought this monitor.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=6195634061&ssPageName=MERC_VIC_ReBay_Pr4_PcY_BIN
How do I connect it to my arcade machine? I think I've got the basic stuff. Red,green,blue and Black is ground but where do I connect the white & yellow wires? Heres a picture of the connector and board.

Title: Re: 19" mon from ebay - A little help?
Post by: RayB on July 23, 2005, 12:33:19 am

white and yellow are your SYNC wires.

Title: Re: 19" mon from ebay - A little help?
Post by: PileDriver on July 23, 2005, 04:54:50 am

Thats what I thought but I didn't want to have a melt down.
I hooked it up and it works. :)
Now with some fine tuning my P-47 Phantom will be playable.
Thanks!!

Title: Re: 19" mon from ebay - A little help?
Post by: Fig on July 26, 2005, 12:25:57 pm

PileDriver,
How is the pic on the monitor? Im thinking of buying one soon

Title: Re: 19" mon from ebay - A little help?
Post by: PileDriver on July 26, 2005, 03:55:36 pm

I haven't had the chance to put it into the cab yet.
But I did connect to my P-47 and it looked good on the bench.
I also tested it with my capcom bowling with the same results.
Your mileage may very. :)
I hope to put it next week.
I'll know more after some play time.

Title: Re: 19" mon from ebay - A little help? Solved.
Post by: Fig on July 26, 2005, 07:11:26 pm

Thanks for the input PileDriver. I got one to put into my Super hang on cab. I'll let you know on the output.
Thanks again Craig