The NEW Build Your Own Arcade Controls

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: jimmyjet on July 08, 2005, 06:02:11 pm

Title: Amidar pinout help
Post by: jimmyjet on July 08, 2005, 06:02:11 pm

I traded for an Amidar PCB.  I thought this would have the Konami Classic pinout.  My Amidar pcb has a 22/44 connector.  It has Konami printed on the pcb.  It also says licednsed to Olympia by konami.  Any ideas on the pinout?
Thanks for any help.
jim

Title: Re: Amidar pinout help
Post by: jimmyjet on July 11, 2005, 07:46:34 pm

OK, no one seems to have a pinout for this board.  Who knows how to trace the pins to figure out what should go to what.  I've got the
gnd and +5v handled already.  I need to figure out RGB sync, inputs, etc.
Thanks
jim

Title: Re: Amidar pinout help
Post by: dirt on July 11, 2005, 08:13:20 pm

every pinout i have found for amidar is the konami 18 not 22. i couldn't find anything on a 22 pin board, sorry.


dirt

Title: Re: Amidar pinout help
Post by: Q*Bert_OP on July 11, 2005, 08:27:49 pm

Maybe the 22 pin is a bootleg???

Title: Re: Amidar pinout help
Post by: MonitorGuru on July 11, 2005, 10:30:28 pm

I believe it is a boot.

Title: Re: Amidar pinout help
Post by: Q*Bert_OP on July 12, 2005, 04:10:11 pm

Also, bally/midway and other manufactuers made certian boards to be a drop in replacement for games like frogger...