The NEW Build Your Own Arcade Controls

Main => Software Forum => Topic started by: arcadecab on April 27, 2005, 04:58:32 pm

Title: Please help--Catver, MAMEinfo, ??
Post by: arcadecab on April 27, 2005, 04:58:32 pm

I have recently upgraded to MAMEwah 1.61 and in the process cant figure out why the following has occured:  Now with the rom status, the General status is listed as Good, but every rom is listed at preliminary for sound and color.  Of course, not every rom is preliminary for sound and color.  Is this a problem with catver.ini, mameinfo.dat or what else would be cause the error in the status reading shown in MAMEwah.  Thanks for any help.

Title: Re: Please help--Catver, MAMEinfo, ??
Post by: vibez on April 27, 2005, 05:35:14 pm

maybe you have filters setup to only show preliminary status games?

Title: Re: Please help--Catver, MAMEinfo, ??
Post by: arcadecab on April 27, 2005, 05:49:31 pm

Nope, all the games are displayed with the filters for all games, just that the status display constantly shows all the games as having color and sound preliminary.

Title: Re: Please help--Catver, MAMEinfo, ??
Post by: MrSaLTy on April 27, 2005, 06:31:37 pm

Not sure... but did you regenerate your game list? Maybe somethings different.

Title: Re: Please help--Catver, MAMEinfo, ??
Post by: screaming on April 27, 2005, 10:19:24 pm

Are you using MAMEWAH Config?

Zip up your -0.lst and -1.lst and email them to me and I'll see if I can see what's going on.

  All that information is in the -listxml output that MAMEWAH will use when your list_generation_method is set to rom_folder_vs_listxml.  The catver.ini or mameinfo.dat don't give that information.

-sab