Build Your Own Arcade Controls Forum

Main => Artwork => Topic started by: itismejs on February 01, 2005, 07:01:53 pm

Title: Need the moon patrol bezel?
Post by: itismejs on February 01, 2005, 07:01:53 pm

I have a moon patrol monitor bezel that isnt beaten up too badly. If its not on the vector site (didnt find it) I would be happy to take pics of it.

Title: Re: Need the moon patrol bezel?
Post by: mahuti on February 01, 2005, 11:44:37 pm

Absolutely. Do it.

Title: Re: Need the moon patrol bezel?
Post by: bosco on February 02, 2005, 06:59:57 pm

How 'bout scanning it?  Better than a photo :)

Title: Re: Need the moon patrol bezel?
Post by: mahuti on February 03, 2005, 02:12:30 am

Actually... sometimes not. Depends on the camera, depends on the scanner. One of the guys that regularly gives me side art & marquees only uses a camera. A camera with mega mega pixels, but a camera nonetheless. His shots are better than most of the scans that I get. If a cabinet is well lit, and the camera has a good resolution, you can capture some great stuff.

The margin of error with a camera for a novice is much greater, however.

Title: Re: Need the moon patrol bezel?
Post by: RayB on February 03, 2005, 02:32:47 pm

With a camera, just remember to use a tripod, keep the subject very well illuminated, but make sure the lights are not reflecting off the glass.

Title: Re: Need the moon patrol bezel?
Post by: itismejs on February 03, 2005, 09:14:53 pm

I'll whip out the tripod over the weekend. The design is simple and the sides are both recipricles (sp) of each other except for a box for the instructions.

Title: Re: Need the moon patrol bezel?
Post by: itismejs on February 05, 2005, 04:02:51 pm

ok took the picture and made an email addy to upload it to...password being Pmed to mah...if you want it just PM me.