The NEW Build Your Own Arcade Controls

Main => Project Announcements => Topic started by: skid_68 on November 09, 2004, 10:42:06 pm

Title: Project: MegaCade (CP Pics)
Post by: skid_68 on November 09, 2004, 10:42:06 pm: I got my CPO printed, and on a few weeks ago, and now getting time to post it here. The artwork was a combonation of Snaake, and I. What do ya think?
Title: Re:Project: MegaCade (CP Pics)
Post by: skid_68 on November 09, 2004, 10:45:52 pm: #2
Title: Re:Project: MegaCade (CP Pics)
Post by: skid_68 on November 09, 2004, 10:47:54 pm: #3
Title: Re:Project: MegaCade (CP Pics)
Post by: skid_68 on November 09, 2004, 10:48:27 pm: #4
Title: Re:Project: MegaCade (CP Pics)
Post by: SirPeale on November 09, 2004, 10:56:48 pm: Good artwork!

Bad dust washers on TOP of artwork.
Title: Re:Project: MegaCade (CP Pics)
Post by: SNAAKE on November 09, 2004, 10:58:59 pm: Looks great !! :D
BTW I worked on the artwork but he made some changes here and there 8)
Title: Re:Project: MegaCade (CP Pics)
Post by: pointdablame on November 09, 2004, 10:59:23 pm: Quote from: Peale on November 09, 2004, 10:56:48 pm
Good artwork!

Bad dust washers on TOP of artwork.

Wow, took the words right out of my mouth.
Title: Re:Project: MegaCade (CP Pics)
Post by: skid_68 on November 09, 2004, 11:05:21 pm: Quote from: SNAAKE on November 09, 2004, 10:58:59 pm
Looks great !! :D
BTW I worked on the artwork but he made some changes here and there 8)

Thats what I said. :P It sure looks good. ;D

So are you guys saying I should take them off completely? or what?
Title: Re:Project: MegaCade (CP Pics)
Post by: SirPeale on November 09, 2004, 11:17:39 pm: I would have routed the area underneath for the washers, that way they'd be under the artwork.

You route out a place for the washer, and a place for a square of plexi over that the exact depth of the plexi. Inlay the plex into the wood with the washer underneath. It looks really sharp, if you do it right.
Title: Re:Project: MegaCade (CP Pics)
Post by: lucindrea on November 09, 2004, 11:58:29 pm: personaly i like the washers , gives it a more "arcade" look
Title: Re:Project: MegaCade (CP Pics)
Post by: wrxh8r on November 10, 2004, 05:47:13 pm: Looks awsome
Title: Re:Project: MegaCade (CP Pics)
Post by: SNAAKE on November 10, 2004, 07:01:41 pm: Quote from: skid_68 on November 09, 2004, 11:05:21 pm

Thats what I said. :P It sure looks good. ;D

I was busy drooling over the CP and missed that :D
Title: Re:Project: MegaCade (CP Pics)
Post by: MiKman on November 10, 2004, 10:07:56 pm: Quote from: lucindrea on November 09, 2004, 11:58:29 pm

personaly i like the washers , gives it a more "arcade" look

I agree with you, if the washers were not there, then it would just look silly with an unfinished hole there. The washers make it look 'finished'.
Title: Re:Project: MegaCade (CP Pics)
Post by: JamIt on November 11, 2004, 11:29:43 am: Artwork is sweet!
I don't dig the red/white/blue buttons, especially on the left with the bada$$ MK chars. Maybe a more sinister Black and purple?
Again, artwork is awesome and the washers don't bother me at all.
--JamIt
Title: Re:Project: MegaCade (CP Pics)
Post by: DeathDealer on November 12, 2004, 12:47:43 am: Very impressive.
I like fighters, not so much MK, but I like Your CP very much, nice work.
Title: Re:Project: MegaCade (CP Pics)
Post by: Wenis on November 12, 2004, 12:32:09 pm: This is probably a dumb ? but how did you get Something that big all on one sheet of paper
Title: Re:Project: MegaCade (CP Pics)
Post by: javeryh on November 12, 2004, 02:44:32 pm: He probably took it to a print shop like Kinkos or something...
Title: Re:Project: MegaCade (CP Pics)
Post by: skid_68 on November 12, 2004, 06:08:23 pm: Yeah I know a guy with a 54" printer. He does it for $6 bux a square foot. So just my marquee, was about $7 bux. :)