Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Flashflood140 on November 09, 2025, 10:27:45 pm

Title: Ms. Pac monitor hell continues.
Post by: Flashflood140 on November 09, 2025, 10:27:45 pm

So I've made some progress on my Ms pacman with the 19in g07 I went and got a high voltage probe and tested the flyback.  No good. So i swapped back in the original flyback. I now have neck glow and flyback buzz. But I still don't have a picture! Monitor been recapped brand new neck board. I replaced the 902 fuse. What's next? Should I replace the the hot's

Sent from my SM-S921U1 using Tapatalk

Title: Re: Ms. Pac monitor hell continues.
Post by: DeLuSioNal29 on November 17, 2025, 12:50:58 pm

Go through this video step by step and follow along.  He tests all the components.  That should get you up and running:
https://youtu.be/VPMf2mIa4k4?si=MGcQlzoe5TiddXlk

Del

Title: Re: Ms. Pac monitor hell continues.
Post by: Flashflood140 on November 29, 2025, 09:22:54 pm

Im still having issues does anyone know if this is good neck glow went ahead replaced a couple of resistors on the chassis r123 r122 which I think are for the heater circuit. Does anyone know what the resistor is for r 122? The rebuild video didn't help as I'm not rebuilding this chassis just trying to get it working. Anyway to find out if the tube is okay?(https://uploads.tapatalk-cdn.com/20251130/62500db0d6aed04ee25cce66fdf24f7b.jpg)

Sent from my SM-S921U1 using Tapatalk